Attero Tech Dante unD6IO-BT Manual del usuario - Página 18
Navegue en línea o descargue pdf Manual del usuario para Accesorios Attero Tech Dante unD6IO-BT. Attero Tech Dante unD6IO-BT 19 páginas. Bluetooth multi-i/o wall plate
Imprimir página
unD6IO-BT
User Manual
6 – ARCHITECTS & ENGINEERING SPECIFICATION
The Dante™ 2-gang wall plate interface unit shall provide a stereo Bluetooth® 3.0 compatible audio receiver in a Décora
form factor. The Bluetooth® receiver shall be activated for pairing and connection by a single button on the wall plate.
The Bluetooth® receiver shall also feature remote customization via a software control interface.
The device shall also provide two sets of unbalanced line level input connections: one on a set of RCA connectors, the
other using a stereo 3.5mm TRS connection. These inputs are selectable for independent or summed operation via
software and introduced to the Dante™ interface on Dante™ transmit channels 3 and 4. The internal analog to digital
signal conversion shall be performed at 24-bit resolution with a sampling frequency of 48 kHz.
The Dante™ Bluetooth interface shall support bidirectional call-bridging capabilities as well as unidirectional media
streaming receiver functionality.
The two received Dante™ output channels shall also be converted and output on a front panel mounted 3.5mm stereo
TRS connector. The internal digital to analog signal conversion shall be performed at 24-bit resolution with a sampling
frequency of 48 kHz.
The Dante™ interface unit shall receive power over the Ethernet cable from an IEEE 802.3af PoE compliant network switch
or midspan injector.
The Dante™ interface shall be compliant with the RoHS, WEEE and REACH directives. The Dante™ interface unit shall be
Compliant with the EMI/EMC requirements for FCC and CE.
The Dante™ interface unit shall be the Attero Tech unD6IO-BT.
© Attero Tech LLC 2018
Page 17
614-00033 Rev 01_c