Attero Tech unD32 BoB Manual del usuario - Página 5

Navegue en línea o descargue pdf Manual del usuario para Equipos de grabación Attero Tech unD32 BoB. Attero Tech unD32 BoB 19 páginas. 32 channel dante break out box

Attero Tech unD32 BoB Manual del usuario
1 – Overview
The unD32 is a 32 channel Dante break out box (BoB) and comes in a 19-inch 1RU rack mountable chassis that is
approximately 7.5 inches deep. Its 32 analog output channels are fully balanced with grounding and shielding per
AES48-2005 standards. Each output has the following features:
Rear panel connectors using a 3 pin Phoenix style connector receptacle with a pin pitch of 3.81mm (150mils)
o
Capable of a maximum output level of +20dBu before clipping
o
Individually adjustable volume over a 60dB range using the unD32 internal volume controls
o
Individual mute facility
o
Can be assigned to any stream available on the Dante network the D32 is connected to
o
In additional to the volume and mute controls per channel, there is also a master volume and master mute. All the
volume and mute controls can be accessed by using the unD32 unIFY control panel.
The unD32 includes front panel controls which consist of a 16x2 backlit character display and a 6 button keypad.
These can be used to both assign named Dante audio flows to each of the 32 balanced outputs and control the output
volume of each channel directly on the unit itself.
The unD32 features both primary and secondary Gigabit Dante network connections as well as a third "local" Gigabit
port. All three of these network interfaces are available via separate 8P8C modular connector receptacles (RJ-45) on the
rear panel of the unit. The three ports allow the unD32 to be run in single network "Switch" mode or in dual network
"Redundancy" mode.
The unit is powered using an external universal 24V DC power supply (100VAC - 240VAC, 50Hz - 60Hz). The specific
part number used to order the unD32 determines what style of mains connector the supplied power cord comes with.
1.1 – What's in the Box?
The unD32 comes supplied with the following:
o
unD32 unit (710-00149-01)
o
24V DC Power Supply
o
AC Power Cord (mains connector type determined by part number used to order the unD32)
o
32 Phoenix-style connector plugs (RIA 31369103)
© Attero Tech LLC 2015
Figure 1 - unD32 Front
Figure 2 - unD32 Rear
Page 4
unD32 BoB
User Manual
614-00012 Rev 02