DSS NETWORKS 5161 Manual - Página 10

Navegue en línea o descargue pdf Manual para Controlador DSS NETWORKS 5161. DSS NETWORKS 5161 18 páginas. Gigmac pmc/pci controllers

GigMAC PMC and PCI

Note: Cables used for Gigabit networks must use all 8 wires. In 10 and 100

modes, wires are dedicated for transmit or receive while in Gigabit mode, data is

transmitted and received over all 4-pairs.

10/100

Signal

Transmit+

Transmit-

Receive+

Unused

Receive-

Unused

Connecting Fiber optic Model 7160

This section explains how to connect the GigMac fiber controller to the external

network using standard fiber optic cables. Typically 50 or 62.5 micron multimode

fiber optic cables with LC or SC type connectors are used depending on the

connector option (see section on distance for Model 7160 toward end of this

document in Specifications).

Insert the fiber optic cable into the SC or LC type connector until the self-locking

tab clicks into position. Connect the opposite end in to a 1000 Base SX switch.

Two types of cables are used when connecting the GigMac fiber controller to the

network. A workstation or "straight through" cable is typically used to connect

Ethernet adapters to switches. A crossover cable may also be used to connect

adapters to adapters. This configuration is useful for diagnostic purposes or

when a switch is not available.

3. SOFTWAREW DRIVER INSTALLATION

The following sections explain how to install the driver software in VxWorks,

Linux and Windows based systems.

3.1 VXWORKS DRIVER INSTALLATION

Please see the vxWorks OEM Developers Guide p/n 131901 for vxWorks

software installation and integration.

DSS NETWORKS, INC

Controller and Driver Users Manual

Gigabit

Signal

Channel A+

Channel A-

Channel B+

Channel C+

Channel C-

Channel B-

Channel D+

Channel D-

Version: 1.12

Page: