DST ObservAir Series Manual de inicio rápido - Página 2

Navegue en línea o descargue pdf Manual de inicio rápido para Accesorios DST ObservAir Series. DST ObservAir Series 2 páginas.

ObservAir Series

See the air we share

Quick Start Guide

5. Filter changing

The LED indicator will slowly ﬂash

Follow the three step process illustrated below.

Step 1: Loosen thumbscrew

and pull out old ﬁler tab.

6. Charging

Plug into 2.1A USB charger using microUSB

cable. When the unit is on, LED ﬂashes

to acknowledge charging input. When the

unit is off, the LED glows

7. WiFi Provisioning

Hold LED button until double

release. Select 'Our Product' WiFi network

from PC or mobile device. Enter credentials

in portal and press submit. LED ﬂashes

to acknowledge receipt and unit restarts.

8. Recommended settings

Recommended ﬂow rate and

sampling period settings are

provided for several typical AQ

applications. BC levels and

ﬁlter life are also estimated

for each scenario.

Distributed Sensing Technologies

Web: www.dstech.io Email: [email protected]

yellow

to indicate that the ﬁlter tab must be replaced.

Step 2: Insert new tab.

Align notch with white dot.

red

while charging.

blue

ﬂash and

blue

Step 3: Tighten thumscrew.

Verify tab orientation.