DStv 5-2 Manual del usuario - Página 10
Navegue en línea o descargue pdf Manual del usuario para Interruptor DStv 5-2. DStv 5-2 17 páginas.
Imprimir página
- 1. Product Overview
- 2. Your Dstv Switch
- 3. LNB Requirements
- 4. Connecting the Inputs from Your Satellite Dish
- 5. Twin LNB Connection (IS20)
- 6. Twin LNB Connection (E36)
- 7. Quad LNB Connection (IS20)
- 8. Quad LNB Connection (E36)
- 9. 3 Cable Quad LNB Connection (E36)
- 10. Quattro LNB Connection
- 11. Connecting the Switch to Your Decoder(S)
- 12. Connecting the Dstv Switch (5-2) to Two Dstv
The DStv Switch (5-2) has two Explora outputs (labelled A and B) and four
normal multiswitch outputs (labelled 1 to 4).
• The Explora outputs can only be connected to a DStv Explora, they aren't
designed to connect to other decoder models.
• The four normal multiswitch outputs can be connected to up to four single
view decoders, one 4 Tuner HD PVR, or a mix of DStv decoders (other
than the DStv Explora). Again, remember that the DStv Explora cannot be
connected to these particular outputs.
These diagrams exclude the connections between decoders that are required for XtraView. For
information on XtraView installations, including connections and settings, please contact a DStv
accredited installer.
Connecting the DStv Switch (5-2) to one DStv Explora
Once the switch has been connected to the satellite dish, use the
supplied cable and connect output A or B on the switch to the input
labelled UNICABLE™ IN on the back of your DStv Explora.
8
Connecting the Switch to your Decoder(s)
H/L
V/L
H/H
1
2
3
V/H
DStv Explora
A
B
4
DStv Switch - User Guide