DT Research DT311NV Manual de inicio rápido - Página 3

Navegue en línea o descargue pdf Manual de inicio rápido para Tableta DT Research DT311NV. DT Research DT311NV 4 páginas.

Imprimir página

OPERATION

Powering ON and OFF

To activate the DT311NV, push and quickly release the Power Button. The display will

come on in a few seconds. To put the DT311NV in Standby mode, push and quickly

release the Power Button. To turn the DT311NV off for extended storage, power

off safely using any software function that "shuts down computer" provided in the

software operating system.

NOTE:

The battery pack shipped with your tablet may be low in power—please use

the AC-DC adapter with the DT311NV when setting up for the first time to fully

charge the battery pack, or use the optional battery charger kit.

NOTE:

When the battery pack is charging, the blue Battery LED should blink slowly.

If plugging in the AC-DC adapter does not trigger this blinking activity and

the LED stays dark, the battery pack(s) may have been drained substantially.

Try unplugging/ replugging the AC-DC adapter to the DT311NY a few times to

activate the charging process.

NOTE:

To conserve power, use (push and quick release) the Power Button to put the

tablet in "Standby" mode while not in use. Pushing briefly on the same button

will wake up the system within seconds.

NOTE:

Avoid using the Power Button ("hold 4+ seconds" feature) to turn off the

tablet—this form of hardware shutdown is intended to be a means of recovery

from lockups, and not as normal operation.

Start Up

If the power up (from Standby mode or otherwise) is successful, the appropriate

interface will be displayed after a launch sequence of several seconds. The wireless

LAN connection may take 10-15 seconds to be established.

Conﬁguring the Rugged Tablet

The DT311NV may be configured using the utilities and methods dictated by

the software operating system. The DT311NV should be configurable for various

properties such as user profiles, network features, and several system elements.

NVIS Mode and Screen Brightness Control

•

When power button is pressed to power on the unit, power LED will flash orange

once to indicate the unit is booting. Unit will boot into NVIS mode with zero nit

brightness by default and display will be dark. You can press the "Brightness Up"

and "Brightness Down" buttons to set NVIS mode display to desired brightness

(up to 20 nits).

•

To toggle between NVIS and high-brightness display mode, press the "NVIS/

Normal Mode Toggle" button. When changed from NVIS mode to high-brightness

mode, display brightness percentage will be same as the brightness level set in

NVIS mode before toggling.

•

Use brightness control buttons to set desired brightness level. When changed

from normal display mode to NVIS mode, display brightness will be set to 0 nit

(display is dark) and you need to use brightness control buttons to change display

to desired brightness.

•

Brightness up, Brightness down, NVIS/Normal toggle, Windows Key and Control

Center functions are fixed and not user programmable.

•

Two programmable buttons on left side can be programmed through Button

Manager.