AirTools 6000 Especificaciones - Página 2
Navegue en línea o descargue pdf Especificaciones para Equipo de música AirTools 6000. AirTools 6000 2 páginas. Airtools 6000 broadcast audio delay
Imprimir páginadraft - 8 Nov 04
AIRTOOLS 6000 BROADCAST AUDIO DELAY
100-250VAC
50-60Hz
AC INPUT
15 WATTS
MAXIMUM
FABRIQUE PAR SYMETRIX, INC., MOUNTLAKE TERRACE, WA, USA.
CETTE UNIT NE CONTIENT PAS DE PARTIES UTILISABLES.
MANUFACTURED BY SYMETRIX, INC., MOUNTLAKE TERRACE, WA, USA. THIS UNIT CONTAINS NO USER SERVICEABLE PARTS.
continued from preceding page...
•
If a guest makes an unwanted comment, or you want to
delete content, press DUMP and keep going. The unwanted
material, up to the last 40 seconds of your broadcast,
disappears while the show goes on.
•
Another way to get rid of unwanted content is with COUGH.
In the middle of a broadcast, you may need to say something
"off air" to your guests, for example, or have a quick drink of
water. Press COUGH to edit out unwanted airtime, and then
release it when you're finished. The broadcast picks up again.
•
If you are a network syndicator, the 6000's Automation
Control Interface offers the ability to trigger automation
changes or control a router with 'delayed' contact closures.
Four TTL logic inputs on the 6000 digitally tag the audio on
input and close the corresponding relay when the tagged
delayed audio reaches the 6000's output. It takes all of the
mathematical guesswork out of local breaks and switchovers.
•
At the end of your program press EXIT and the 6000
gradually leaves the delay mode until you are in real time.
A comparison of the AirTools 6000 and 6100 delays.
AES-3 digital I/O
Word clock input
Time in delay display (ESE TC89)
RS-232 & RS-485 control ports
TTL contact closure inputs
Automation / router relay outputs
Specifications
Input/Output
Inputs
Outputs
Input Connectors
Output Connectors
Polarity
Maximum Input Level
Maximum Output Level
Input Common Mode Rejection
Performance Data
Frequency Response
Harmonic Distortion
Dynamic Range, A/D
Dynamic Range, D/A
A/D and D/A Conversion
Internal Sample Rate
Maximum Delay
Physical
Size (HWD)
6000
6100
Shipping Weight
Electrical
No
Yes
Power Requirements
No
Yes
*
A high pass filter is engaged during build and exit modes when using the gap detect
No
Yes
or gap detect+catchup algorithms. During build and exit modes when using either of
these algorithms, the frequency response will be down about -3 dB at 100 Hz.
No
Yes
Yes
Yes
Yes
Yes
© 2001-2004, Symetrix Inc. All rights reserved. Symetrix reserves the
right to alter, change, or modify specifications and prices without prior no-
tice. AirTools is a trademark of Symetrix, Inc. ESE, TC89, and ESE Time
Code are trademarks or registered trademarks of ESE. All other product
names are trademarks or registered trademarks of their respective hold-
ers. AirTools products are manufactured by Symetrix, Inc. in the USA.
REMOTE CONTROL & INDICATORS
1
AUTOMATION
1
25
stereo, balanced bridging
stereo, electronically balanced
XLR, BNC (ESE time code)
XLR, BNC (ESE Time Code)
Pin 2 high
+28 dBu
+28 dBu into 100k ohms
>40 dB @ 1 kHz
20 Hz to 20 kHz *, +/- 1 dB @ +4 dBu
output
less than 0.01% with +4 dBu input,
+4 dBu output, 40 second delay and
a 1 kHz test signal.
-110 dB (A-wieghted)
-115 dB (A-wieghted)
24-bit sigma delta
48 kHz
40 seconds
1.72 in. x 19 in. x 8.2 inches
4.37 cm x 48.30 cm x 17.145 cm
8 lbs, 3.64 kg
100 - 240 VAC, 50 Hz to 60 Hz, 25 W
6000 Broadcast Audio Delay
ANALOG OUT
ANALOG IN
RIGHT
LEFT
RIGHT
A p p l i c a t i o n s
•
AM and FM
•
All music formats
•
News and talk radio
•
Call-in shows and guest oriented broadcasts
•
Sports radio and live sports broadcasts
•
Live or unknown taped content
Symetrix, Inc.
Tel. (425) 778-7728
Fax. (425) 778-7727
Mountlake Terrace, WA USA
sales@airtoolsaudio
www.airtoolsaudio.com
Engineered by
LEFT
TM
Symetrix