DT Research DT372 Manual de funcionamiento básico - Página 3

Navegue en línea o descargue pdf Manual de funcionamiento básico para Tableta DT Research DT372. DT Research DT372 4 páginas. Mobile pos tablet

Imprimir página

DT372

OPERATION

Internal Battery

Warning!

The Internal battery pack should only be replaced by an authorized DT Research service

representative. Please contact your product and/or service provider for internal battery

replacement service.

Powering ON and OFF

To activate the DT372, use the stylus to push and quickly release the Power Button. The

display will come on in a few seconds. To put the DT372 in Standby mode, push and

quickly release the Power Button. To turn the DT372 oﬀ for extended storage, power oﬀ

the device safely using any software function that "shuts down computer" provided in

the software operating system.

NOTE: The battery packs shipped with your device may be low in power—please use

the AC-DC adapter with the DT372 when setting up the device for the ﬁrst time to fully

charge the internal battery pack.

NOTE: When the battery pack(s) is (are) charging, the blue-colored Battery LED should

blink slowly. If plugging in the AC-DC adapter does not trigger this blinking activity

and the LED stays dark, the battery pack(s) may have been drained substantially. Try

unplugging/ replugging the AC-DC adapter to the DT372 a few times to activate the

charging process.

NOTE: To conserve power, use (push and quick release) the Power Button to put the

device in "Standby" mode while not in use. Pushing brieﬂy on the same button will wake

up the system within seconds.

NOTE: Avoid using the Power Button ("hold 4+ seconds" feature) to turn oﬀ the

device—this form of hardware shutdown is intended to be a means of recovery from

device lockups, and not as normal operation.

ENGLISH

Start Up

If the power up (from Standby or otherwise) is successful, the appropriate interface will

be displayed after a launch sequence of several seconds. The wireless LAN connection

may take 10-15 seconds to be established.

Conﬁguring the DT372

The device may be conﬁgured using the utilities and methods dictated by the software

operating system. The DT372 should be conﬁgurable for various properties such as user

proﬁles, network features, and several system elements.

Calibration

The touch display for the DT372 is calibrated before shipping. In the event that the

calibration has been modiﬁed or is unsatisfactory, the respective calibration routines

(e.g., PenMount (PM) for Windows XP) to calibrate the touch interface may be used.

Such applications are typically executed through touch input via Stylus or through mouse

click via a USB mouse.

Wireless Networking

Wireless LAN

The DT372 is often delivered with an embedded (user-inaccessible) 802.11a/b/g/n

WLAN adapter equipped with a hidden custom antenna.

• hrough the support of typical WLAN adapters, the DT372 should be able to detect

all 802.11 access points in the vicinity for you to select the access point of your

choice for connection.

• he SSID and WEP/WPA/WPA2 (if enabled) parameters on the DT372 and the

access points have to match. The SSID is case-sensitive and it is recommended

that you enable WEP/WPA/WPA2 encryption (or advanced alternatives) for secure

access.

•

hen WEP/WPA/WPA2 is enabled, you may need to consult your network admin-

istrator or your networking equipment literature to properly conﬁgure associated

settings such as Authentication mode, etc.

• efer to the access point operating manuals for setting up the 802.11 access points.

ENGLISH