DT Research 554GR Manual de funcionamiento básico - Página 2

Navegue en línea o descargue pdf Manual de funcionamiento básico para Equipamiento médico DT Research 554GR. DT Research 554GR 2 páginas. Medical-grade graphics station

Imprimir página
I/O Ports
The Graphics Station System has a comprehensive set of I/O ports located at the bottom side of
the unit.
554GR
Front
M
Bo�om
A
B
C
Power button
A
H
Brightness +/-
I
B
Display Port
J
C
DC-In Jack
K
D
L
E
USB 3.0
F
Ethernet
M
G
Microphone
PRECAUTIONS
•
Always exercise care when operating and handling the Graphics Station System.
•
Never disassemble any portion of the enclosure, as this will void any product warranty on
the Graphics Station System.
•
Do not use any AC/DC adapter other than the one provided with the device or a replacement
acquired from the manufacturer.
•
In the unlikely event that smoke, abnormal noise or strange odor is present, immediately
power down the Graphics Station System and disconnect all power sources. Please report
the problem to your device provider immediately.
2
Back
F
H
J
D
E
G I
J
F
K
L
Potential Equalization
Headphone
COM
USB Type-C
USB 2.0
Front Camera
BASIC FEATURES
The Graphics Station System integrates a high-brightness 23.8" display with a high-performance
system and USB ports to satisfy the varying needs for comprehensive point-of-care applications.
Attach The Tabletop Stand (Optional)
1. Insert the top two tabs of the tabletop stand into the top two open slots on the 554GR back
panel.
2. Push the latch to pivot the two lower tabs of the tabletop stand.
3. Push the two lower tabs into the two lower slots on the 554GR back panel. Make sure the
latch locks back into position so the stand is securely attached.
Detach the Tabletop Stand (Optional)
1. Push the latch to pivot the two lower tabs.
2. Pull out the two lower tabs, then the two upper tabs from the 554GR back panel.
Powering ON and OFF
Please use the AC-DC adapter with the Graphics Station System for the power supply. To activate
the Graphics Station System, push and quickly release the Power Button and the display will come
on in a few seconds. To put in Standby mode, push and quickly release the Power Button. To turn
off for extended storage, power off the device safely using any software function that "shuts down
computer" provided in the software operating system.
NOTE:
To conserve power, use (push and quick release) the Power Button to put the device in
"Standby" mode while not in use. Pushing briefly on the same button will wake up the
system within seconds.
NOTE:
Avoid using the Power Button ("hold 4+ seconds" feature) to turn off the device — this form
of hardware shutdown is intended to be a means of recovery from device lockups, and not as
normal operation.
3