DT Research MA1352GL Manual de funcionamiento básico - Página 2
Navegue en línea o descargue pdf Manual de funcionamiento básico para Señalización digital DT Research MA1352GL. DT Research MA1352GL 2 páginas. Multi screen appliance
Imprimir página
HDMI Video-out Ports
MA1352GL
3840 x 2160 @ 60Hz
HDMI 1.4
1920 x 1080 @ 60Hz
3840 x 2160 @ 60Hz
HDMI 2.0
1920 x 1080 @ 60Hz
3840 x 2160 @ 60Hz
Displayport
1920 x 1080 @ 60Hz
Connec�ng Peripherals
Make sure your monitors are connected the MA Appliance with HDMI cables. A�er the
peripherals are well connected, plug the power cord into the Appliance and insert the other end
into a power outlet.
NOTE: DO NOT connect the power cord before connec�ng all cables to the MA Appliance.
Using Cable Extenders
To be compa�ble with the MA Appliance, the extenders should have EDID management
func�on. If there are display issues due to the video cable extenders, please contact your local
reseller or system integrator to recommend verified extenders.
Precau�ons
• Always exercise care when opera�ng and handling.
• Never disassemble any por�on of the enclosure, as this will void any product warranty.
• Do not use any AC/DC adapter other than the one provided with the device or acquired from
the manufacturer or its partners.
• In the unlikely event that smoke, abnormal noise, or strange odor is present, immediately
power down the product and disconnect all power sources.
• Please report the problem to your device provider immediately.
• Pushing on the Power Bu�on again will restart the appliance.
2
ENGLISH
MA1364
HDMI-1
4096 x 2160 @ 60Hz
HDMI-2
4096 x 2160 @ 60Hz
HDMI-3
4096 x 2160 @ 60Hz
HDMI-4
4096 x 2160 @ 60Hz
Powering ON and OFF
The Power Bu�on is located on the back of the MA Appliance.
To turn the MA Appliance on, push and release the Power Bu�on on the front bezel. The power
LED will be lit (blue), and the corresponding interface will be shown on the display monitors.
To turn off the appliance, use the so�ware shutdown interface provided.
If your MA player hangs up, please restart it from WCM or RDP rather than pressing the power
bu�on to restart, otherwise the OS may become corrupted.
Connect Player and Register to WCM Server
When you power on your Mul� Screen Appliance, the registra�on dialog will be launched
automa�cally. You can also launch it from Start | All Programs | DT Research | WebDT Signage
Player | Register Player Again.
NOTE: If your signage player is located in a LAN with a WCM server, the player will automa�cally
register to the server in the same LAN.
Registra�on Informa�on:
Player name: Leave default name or give a new name
Group name: If you did not create a group in WCM
server yet, leave it blank now
Organiza�on name: my site (default)
Access Password: 123456 (default)
Publish Server URL:
h�p://(server IP address): (port number)/publish
or, h�p://localhost: (Port number)/publish
• To exit the full screen introduc�on, press "Ctrl+Shi�+Space" to exit the WebDT Signage Player.
• To re-launch the WebDT Signage Player, navigate to Start | All Programs | DT Research |
WebDT Signage Player | Start player.
• To register this signage appliance to another WebDT Content Manager Server, navigate to Start
| All Programs | DT Research | WebDT Signage Player | Register Player Again, and then the
Player Registra�on dialog will be launched. Fill in all fields to register. Click OK to register and
connect to the preferred WebDT Content Manager Publish Server.
• Please refer to documenta�on included in the DVD of your package to start managing your
content, playlists and schedules via WebDT Content Manager.
3
ENGLISH