Airtopia Control4 Instrucciones de instalación y uso - Página 7

Navegue en línea o descargue pdf Instrucciones de instalación y uso para Controlador de temperatura Airtopia Control4. Airtopia Control4 8 páginas.

10. You should now be able to view the Device Status by changing selecting 'True' in the dropdown box for the

'Show Device State' property.

11. You will notice that the Connection Status is set to ONLINE. If it is OFFLINE then you will need to make sure that

the unit is on the correct IP address.

Programming other commands

Due to limitations in Control4 no additional controls can be added to Control4's user interfaces apart from Mode and

Fan Speed. As such commands can be programmed to fire using the Control4 programming tab. This can be assigned to

Custom Button press events or assigned to zigbee keypads on the wall for example. Note that not all mode changes are

available and are determined by the unit you are using.



Horizontal Swing



Vertical Swing (0 = 0°, 1 = 22.5°, 2 = 45°, 3 = 67.5°, 4=90°, off = default rest position)

Page | 7