DTD RING 14 Manual del usuario - Página 13
Navegue en línea o descargue pdf Manual del usuario para Instrumento de buceo DTD RING 14. DTD RING 14 18 páginas. Buoyancy compensator
También para DTD RING 14: Manual (6 páginas)
Imprimir páginaThreading the strap through the belt buckle
pic. 1
pic. 2
When finished, both parts of the Velcro should line up and ensure that the
buckle does not unfasten.
2.
Assembly of the compensator for use with doubles
When using a buoyancy compensator with
doubles (two bottles connected by steel bands),
you first thread the wing on the screws, which
are incorporated in the middle of the steel bands
(just like when using one bottle, the inflator
elbow is on the side with bottles). Then proceed
by placing the backplate on the same screws.
Then fasten the whole system with wing nuts.
Correct attachment of the inflator hose:
pass the low-pressure inflator hose under rubber
bands on the corrugated hose. Continue by
passing it under the rubber band on the left strap
of the backplate above the D-ring, and attach
it to the inflator.
This way, the inflator will be in a place where
there will be no collisions with other equipment
and you will always find it where you need it.
Revised – February 2020
pic. 3
pic. 4
12