Attonic ARFS-20 Manual de instrucciones - Página 7

Navegue en línea o descargue pdf Manual de instrucciones para Equipos de prueba Attonic ARFS-20. Attonic ARFS-20 13 páginas. Arfs-series digital force gauge

Imprimir página

■Explanation of each parts (1)

・ EXTERNAL INPUT / OUTPUT (CON.)

It is possible to do the various outside output and

display reset from outside. For details, see the

explanation of the output connector page No.9.

・ POWER CONNECTOR (DC)

Insertion connector of AC adapter for the charging.

The standard recharging time is about 4 hours after making

a power off. The charging condition can be confirmed by

display when making a power on.

inserting AC adapter. However, it becomes the cause which

hastens the degradation of the charging battery. Recommend

to use without using AC adapter as much as possible.

・ GAIN ADJUST DIAL

ONLY MANUFACTURE SIDE (NEVER CHANGE THIS DIAL)

It is used when the calibration at the manufacture.

・ LCD DISPLAY

Using graphic LCD (liquid crystal), it is possible to

show a feature character, setting character, numbers and

charging scale in the display.

・ PROTECTION GLASS

Digital display is covered by protection glass.

・ MODEL AND MAX. CAPACITY STICKER

Model number and maximum display value of 3 units and

indicated.

・ POWER SWITCH (P)

On/Off button of the power. The buzzer sounds in case

of start the operation.

・ DATA OUTPUT SWITCH (D)

Output button for the digimatic signal and RS-232C signal

of the data.

outputs a RS-232C signal.

(Caution)

It outputs the digital signal when using a function

feature. Also, in case of function feature (FU), it can be

changed Peak Hold and Tracking, the reading of memory data

and various setting of value.

It outputs a digital signal firstly and it

－６－

Also, it can be used

ATTONIC