dtec GJD 350 Manual de instalación y configuración - Página 4

Navegue en línea o descargue pdf Manual de instalación y configuración para Sensores de seguridad dtec GJD 350. dtec GJD 350 12 páginas.

Installation & Set Up Guide

Stage 1 –

3) Feed standard 12 core alarm cable into the cable entry; bare the wires and

connect to the removable terminal block as shown in fig. 7. Screw the unit to the

wall ensuring that the tamper pin is correctly located and that the tamper microswitch

is closed. See fig. 4 and 5. To aid installation, two spare tamper feet are provided.

One is 1mm longer and the other is 2mm longer than the tamper foot originally

fitted. The tamper foot is a push fit and can be removed by carefully pulling it from

the pin. See fig. 2.

4) Always ensure when replacing the electronics module that the LED is facing

forward so as to ensure correct alignment of the beam pattern. (Refer section

titled "Beam Alignment")

5) When the detector has been aligned to suit the installation, replace the front cover

and lock as shown.

See fig. 6.

fig. 5

Mounting the unit (Cont.)

fig. 4

fig. 6