DTF Maxima Semi-Auto Manual del usuario - Página 4

Navegue en línea o descargue pdf Manual del usuario para Herramienta eléctrica DTF Maxima Semi-Auto. DTF Maxima Semi-Auto 7 páginas. Dual heat press

INSTRUCTIONS

1. Connect air compressor connector, open the air pressure, adjust the

pressure guage to 60psi, and raise the heating plate.

2. Connect the air switch, turn on the main power switch, and the

indicator light will turn on.

3. Adjust the required time and temperature, and wait for the machine

to heat up.

4. After heating, temperature meter OUT1 light off, automatic flashing

(insulation). Start testing.

5. Place garment on the platen, making sure garment is flat. Place

pressing paper. Adjust mode to manual, and press the start switch.

6. When the set time is up, the heating plate will raise automatically,

and the machine head will move to the other platen.

7. Observe results of test and adjust settings as necessary.

8. After a successful test, the transfer switch can be left to automatic.

After placing materials to be pressed on the platen, as long as the

press is above the platen, it will press automatically.

9. In case of emergency, press the emergency stop button.

TEMPERATURE & TIME SETTING

1. Press SET once. "5P" will flash at the top, and the controls will enter

the temperature/time setting state.

2. Use the arrow keys to increase or reduce temperature or time.

3. Once the desired time and temperature are input, press SET once

more to set the time and temperature.

4. Press the up arrow key (with RESET written underneath) for 3

seconds to reset time and temperature settings.