dtm HID 868 Manual de instrucciones - Página 2

Navegue en línea o descargue pdf Manual de instrucciones para Transmisor dtm HID 868. dtm HID 868 4 páginas. Built-in 4 channel radio transmitter

1.Transmitter installation

Start with checking radio range of the transmitter. To check radio range register P1 button to receiver,

according to its manual. Place the transmitter in a assembly destination place, press P1 button and check if the

receiver responds properly. If radio range is sufficient for stable operation of the equipment, connect button(s)

between common terminalCOM and selected P1...P4 input.

Example of installing is shown in Figure 2.

After connecting and checking operation of all components install mechanically and re-check the operation of the

equipment.

When checking radio range, both receiver and transmitter must be placed on destination place.

2.Transmitter usage

To control the transmitter press connected momentary push-buttons which emits a radio signal to receiver.

Each transmitter activation is indicated by LED placed on the transmitter control panel (Fig. 1).

The control inputs P1...P4 are functionally equivalent to standard remote buttons.

3. Low battery signalling

Transmitter has a low battery signalling function. If, after using the transmitter LED blinks three times,

change the battery.

installation box

momentery

button NO

Fig. 2 HID 868 exemplary installation diagram.

HID 868 transmitter