3onedata IES6100PN-8T-2LV Manual de instalación rápida - Página 3
Navegue en línea o descargue pdf Manual de instalación rápida para Interruptor 3onedata IES6100PN-8T-2LV. 3onedata IES6100PN-8T-2LV 3 páginas. Managed profinet industrial ethernet switch
Imprimir página
Click "Login" button to login to the WEB interface of
the device.
Note:
The device has no IP address by default, so you can
search and configure the IP address of the device
through PROFINET configuration softwares such as
STEP 7 and TIA Portal.
The default user name and password is "admin123".
If the user name or password is lost, user can restore it
to factory settings via RESET button or management
software; all modified configurations will be cleared
after restoring to factory settings, so please backup
configuration file in advance.
Please refer to user manual for specific configuration
method of logging in to WEB interface and other
configurations about network management function.
【Specification】
Panel
100M copper port
10/100Base-T(X) Self-Adaption
or Forced Mode, RJ45,
Automatic Flow Control, Full/Half
Duplex Mode, MDI/ MDI-X
Autotunning
Relay interface
Support 1 relay alarm
information output, adopt 7-pin
5mm pitch terminal blocks (2-pin
relay), the current carrying
capacity is 1A@30VDC or
0.3A@125VAC
Indicator
Running
Indicator,
Indicator, Interface Indicator
Switch Property
Backplane bandwidth
1.6G
Packet buffer size
2Mbit
MAC address table
8K
Power Supply
Input power supply
12/24/48VDC (12~48VDC), dual
power supply redundancy
Access terminal block
7-pin 5mm pitch terminal blocks
(power supply occupies the left 4
pins)
Power Consumption
No-load
2.2W@24VDC
Full-load
5.0W@24VDC
Working Environment
Working temperature
-40~75℃
Storage temperature
-40~85℃
Working humidity
5%～95% (no condensation)
Protection grade
IP40 (metal shell)
【Disposal of Waste Electrical and Electronic
Equipment (WEEE 2012/19/EU)】
(Applicable in the EU-member
states)
The crossed-out wheeled bin
symbol on the equipment or its
packaging indicates that the
product, at the end of its service
life, shall not be mixed with
unsorted municipal waste but should be collected separately,
in accordance with local laws and regulations.
A proper separate collection of end-of-life equipment for the
subsequent
compatible disposal, will help prevent potential damage to the
environment and human health, facilitating the reuse,
Indicator,
Alarm
recycling and/or recovery of its component materials.
Power
Supply
Private users should contact their vendor or municipal waste
management service and ask for disposal information.
Professional users should contact their suppliers and check
the terms of their selling agreement.
This product must not be disposed of with other commercial
waste.
Users' cooperation in the correct disposal of this product will
contribute to saving valuable resources and protecting the
environment.
recycling,
treatment
and
environmentally