ATV NVR Instalación y funcionamiento
Navegue en línea o descargue pdf Instalación y funcionamiento para Hardware de red ATV NVR. ATV NVR 5 páginas.
Imprimir páginaNVR Quick Setup Guide
Front Panel
1
Power LED
2
4
Network LED
5
Rear Panel
*4 PoE NVR
*8 PoE NVR
*16 PoE NVR
1
Ip camera input
5
eSATA
2
6
Network port
HDMI
3
7
Audio out
USB 3.0
4
8
VGA out
Sensor/Alarm: I/O
>INSTALLATION AND OPERATION (1)
Record LED
3
Playback LED
USB 2.0 Port
6
IR Remote Sensor
9
USB 2.0
10
Power input
11
Power switch
SYSTEM SETUP
When power is turned on, you will see the initializing screen and
it may take up to one minute to complete. After initializing is
complete, an Easy Setup screen will appear.
Easy Setup Wizard
An Easy Setup screen will appear. If you don't want to go through
the setup steps at this time click the Exit button and the system
will go to the main live screen. When you want to set up the system
just click the Easy Setup Menu or Main menu in the right-click mouse
menu. If the Easy Setup is finished and returns to the live screen,
the auto connected camera image will be displayed on the live screen.
The NVR system will record automatically as regular recording.
* For basic system setup and configuration it is recommended to
complete all the setup steps.
IP Camera Registration
You can check the IP camera list and register the desired IP cameras
automatically or manually. If the cameras are connected directly
to the IP CAM port, the NVR system will register the cameras
automatically. If the cameras are connected to the switch/hub,
the NVR system will discover the cameras automatically and then
you can register the cameras to the NVR by clicking the "Registration".