Atwood APC32 Instalación, funcionamiento y mantenimiento

Navegue en línea o descargue pdf Instalación, funcionamiento y mantenimiento para Accesorios para automóviles Atwood APC32. Atwood APC32 3 páginas. Converter / charger for motorhome

Imprimir página

ENGLISH

SAFETY ALERT SYMBOLS

Safety Symbols alerting you to potential personal safety hazards. Obey all safety

messages following these symbols.

WARNING

avoid possible

injury or death

FOR YOUR SAFETY READ ALL INSTRUCTIONS

BEFORE INSTALLATION AND OPERATION

INSTALLATION MUST COMPLY WITH ALL APPLICABLE STANDARDS AND CODES.

Installer:

Provide these instructions to the consumer.

Consumer:

Keep documents for future reference.

The Converter/Charger is designed to convert 120 VAC to

12 VDC. This allows operation of 12 VDC devices while being

connected to shore power; using power from a generator; or

using power from on board storage batteries. It also provides

exceptionally clean low voltage power for charging on board

batteries. This Converter/Charger is a 'switch mode' type

supply. Its high frequency electronic design is maintenance

free with superior performance.

The APC Series offers a wide range of power - 32,45, 55 and

75 amp models - in a compact design weighing just six

pounds. Atwood technology maintains safe, cool, reliable

converter/charging operation, ensuring the performance of

electrical systems with sophisticated controls. The

thermostatically controlled cooling fan also reduces noise and

increases warm weather performance. The APC's circuitry

includes over-temperature and over-current protection,

safeguarding against power supply damage. External fuses

provide "reversed battery" protection, preventing damage from

cross-wiring.

APC filtered power provides smooth, optimum DC appliance

operation and the full output rating is available for battery

charging.

SPECIFICATIONS FOR CONVERTERS

PART

MODEL

LBS

35411

APC32

35412

APC45

35413

APC55

35414

APC75

CAUTION

avoid possible

injury and/or property damage

EXTERNAL

AMPS

DIM

IN INCHES

10.36 x 7.75 x 3.5

LITERATURE NUMBER

CONVERTER/CHARGER

APC MODELS: 32, 45, 55 & 75 AMP

•Installation •Operation •Maintenance

COMMON FEATURES

• Regulated output voltage ensures against erratic charging and

damage to amenities.

• Over current protection prevents battery damage caused by over-

charging.

• Short circuit protection prevents damage to power supply.

• Reverse battery hook-up protection prevents power supply damage

due to cross-wiring.

• Fan cooled prevents unit from over-heating.

• 100% burn-in tested ensures stringent quality assurance.

• 2-year limited warranty.

• ETL listed to UL 458.

INSTALLATION

1. DISCONNECT POWER. Disconnect the RV battery POS (+) wire

at the battery before connecting the Converter/Charger.

PERSONAL INJURY/PRODUCT DAMAGE

• Never store electrical devices in a compartment where

flammable liquids are stored.

• Do not mount the unit in a compartment designed for the

storage of batteries or flammable liquids (such as gasoline).

2. LOCATION. Mounting location may be on any interior (out of

direct weather) surface. Location chosen must be

accessible after installation. When mounted inside a

cabinet, the cabinet must be vented and large enough to

allow dissipation of heated air. Make sure that there is a

minimum of 1" (one inch) free air space from sides and back

of the unit so that cooling air can move through the unit

properly.

AVOID foreign contaminants such as dirt, metal particles or

moisture.

3. MOUNTING. Flanges with holes are provided for ease of

mounting using standard fasteners. Surface must support

the converter's weight (6 lbs) during vehicle operation.

INPUT

OUTPUT

VOLTAGE

105-130

13.6

105-130

13.6

110-130

13.6

110-130

13.6

MPD 39065

Effective 2/04/08

WARNING

INPUT

OUTPUT

CURRENT

AMPS

INPUT

FREQ

58 to 62