Comtel AGM Sentinel Instrucciones de uso

Navegue en línea o descargue pdf Instrucciones de uso para Sensores de seguridad Comtel AGM Sentinel. Comtel AGM Sentinel 2 páginas.

Changing the Batteries in the Satellite Transponder

•

The unit will send an alert indicating the batteries are low.

•

To replace the batteries in the transponder, shut the unit off

using the power button on the side.

•

Unscrew the four (4) Phillips head screws to remove the

transponder from the base plate.

•

Gently unplug the communication cable.

•

Unscrew the six (6) flat-head screws on the battery

compartment cover.

•

Remove the cover and replace batteries with four (4) Lithium

AA batteries and insert them as shown on the battery

compartment.

•

Make sure the black gasket surrounding the battery

compartment lays flat in it's groove before replacing the

battery compartment cover.

•

Replace the cover, insert and tighten all six (6) flat-head

screws. DO NOT OVERTIGHTEN.

•

Tighten screws to 36 in-oz torque. (25 N-cm)

•

Plug the communication cable into the unit and then replace

it on the base plate using the four (4) Phillips head screws.

•

The recommended batteries are Energizer L91 Ultimate

Lithium AA batteries.

•

DO NOT USE ALKALINE BATTERIES.

Operating Instructions for

AGM Sentinel

Comtel Systems Ltd.

12005 149 Street NW

Edmonton, AB T5L 2J2

780-455-1945