ABSTRACT VR8 Manual - Página 4

Navegue en línea o descargue pdf Manual para Equipos de iluminación ABSTRACT VR8. ABSTRACT VR8 15 páginas.

Imprimir página

Connections and controls

courtesy of

Connections and controls

www.sxsevents.co.uk

The VR has a connection panel located at the bottom rear side of the unit.

3-pin XLR connectors are provided for DMX connections. The wiring is pin 3

cold, pin 2 hot, pin 1 grounded. If you are using a controller with a 5-pin DMX

output, you will need to use a 5 to 3 pin adaptor with pins 2 and 3 swapped.

DMX connections can be made to either XLR connector. The last VR in the

line should have a terminating plug fitted to the vacant connector.

The mains inlet is also on this panel and is an IEC plug with integral fuse.

The VR has a user-

friendly control panel

which has a 3-digit

display and 4 buttons.

All the features of the

VR are controlled from

this display panel.

The large button is the

MODE button, used

for

selecting

which

option is to be set.

Hold down the MODE

button to change options. The other three buttons are used to change the

option settings. The function of the button varies depending on the option

being changed.

The display can be set to blank after a period of time by setting the "DBL"

option to ON.

The keypad can be locked to prevent tampering by holding down the mode

button while you turn on the power. You unlock it by repeating this

procedure.

Control indicators

The "dots" on the display indicate what is controlling the VR. If the right hand

dot is lit, a DMX control signal is being received. If the left hand dot is lit,

another VR is sending a light show to this unit. If the middle dot is flashing, the

VR is running from sound triggers.

Page 2

Event production and Audio-Visual Services

Phone: 0870 080 2342

email: [email protected]

www.sxsevents.co.uk

VR8R - Gobo/shutter/rotate channel 4 - CE mode ON

Gobo

DMX CE-off

(centre value in

brackets)

Blackout

0-7 (0)

Open

8-32 (24)

Gobo2 rot ccw*

33-38 (36)

Gobo2 static

39-46 (40)

Gobo2 rot cw

47-64 (56)

Gobo3 rot ccw*

65-70 (68)

Gobo3 static

71--78 (72)

Gobo3 rot cw

79-96 (88)

Gobo4 rot ccw*

97-102 (100)

Gobo4 static

103-110 (104)

Gobo4 rot cw

111-128 (120)

Gobo5 rot ccw*

129-134 (132)

Gobo5 static

135-142 (136)

Gobo5 rot cw

143-160 (152)

Gobo6 rot ccw*

161-166 (164)

Gobo6 static

167-174 (168)

Gobo6 rot cw*

175-178 (176)

Gobo7rot ccw*

179-182 (180)

Gobo7 static

183-190 (184)

Gobo7 rot cw*

191-194 (192)

Gobo8 rot ccw*

195-198 (196)

Gobo8 static

199-206 (200)

Gobo8 rot cw

207-223 (210)

Strobe varispeed

224-255

Always snaps to full gobos. Rotation speed is fixed in this mode.

NB: it is not possible to select these settings on the compact controller. On

the CE controller in-between values can be selected by pressing Gobo and

using the Value slider.

The unit will fade to black if a value of 6-7 is sent, or snap to black if a value of

0-5 is sent. When opening the shutter, the unit will fade if the start value was

6-7 or snap if the starting value was 0-5. See below for notes on fade mode.

DMX Values

CE controller

gobo number

16 (blackout)

Page 23