ATZ HDMI-444MPR-TW Manual - Página 7

Navegue en línea o descargue pdf Manual para Matriz de conmutación ATZ HDMI-444MPR-TW. ATZ HDMI-444MPR-TW 19 páginas. 4x4 hdmi 1.4 seamless matrix switch supports pip/pop/video wall supports mixed inputs

Imprimir página

Model

: ATZ HDMI-444MPR-TW

Description: 4X4 HDMI 1.4 SEAMLESS Matrix Switch supports PIP/POP/Video Wall

Supports mixed inputs

Part1: IR Channel

IR EXT: if the panel sensor is obstructed or the unit is installed in a closed area

out of infrared line of sight, the IR RX receiver included can be inserted into the IR

EXT port at the rear to extend the IR sensor range and enable local control of the

matrix.

IR IN/OUT: Super IR control system interface. For further details, please refer to

the Super IR system control introduction.

Part2: VGA CV AND AUDIO INPUT

Connect to the VGA or CV input source devices such as a DVD player, a Set-top

Box or PC with VGA cable or RCA coaxial cable.Each VGA or CV input is

accompanied with a 3.5mm stereo audio input.

Part 3: PC CONTROL

TCP/IP: This port is the link for TCP/IP controls, connect to an active Ethernet link

with an RJ45 terminated cable.

RS232: Connect to a PC or control system with D-Sub 9-pin cable for the

transmission of RS-232 commands.

Part4: OUTPUT

The HDMI OUTPUT connect to HDMI equipped TVs.

Part5: HDMI INPUT

Connect to the HDMI input source devices such as a DVD player or a Set-top Box

with HDMI cable.

Part6: DC POWER INPUT

Plug the 12V/2.5A DC power supply into the DC12V power in

pg. 7

All specifications are subject to change without prior notice.