Comtrend Corporation GS-7305 Manual del usuario - Página 7
Navegue en línea o descargue pdf Manual del usuario para Interruptor Comtrend Corporation GS-7305. Comtrend Corporation GS-7305 10 páginas.
Imprimir página
2. Installation
2.1 Before Connecting to the Network
Before connecting the GS-7305/GS-7308 to the network,
please pay attention to the following instructions:
Do not put anything on top of the Switch. Place on a
hard, flat surface.
Power sockets and equipments should be within 5
feet of the Switch.
Check power supply to confirm a safe and secure
connection.
Make sure there is adequate space for proper heat
dissipation and adequate ventilation around the
Switch.
2.2 Connecting to End Nodes
Use a standard Ethernet cable to connect the Switch to end
nodes as described below. Switch ports will automatically
adjust to the characteristics (MDI-II/MDI-X, speed, duplex) of
the device to which it is connected.
Switch connecting to an end node
6