Comtrend Corporation WAP-EN1200E Manual de instalación rápida - Página 4
Navegue en línea o descargue pdf Manual de instalación rápida para Punto de acceso inalámbrico Comtrend Corporation WAP-EN1200E. Comtrend Corporation WAP-EN1200E 14 páginas. Ac1200 in-wall wireless access point
Imprimir página
I-5. Reset
If you experience problems with your access point, you can reset the device
back to its factory settings. This will reset all settings back to default.
1. Press and hold the reset button on the access point for at least 10 seconds.
Then release the button.
You may need to use a paperclip or pencil to push the reset
button.
.
2
Wait for the access point to restart. The access point is ready for setup
when the
green
Quick Setup
II
Your access point is preconfigured in a secured setup and ready for use right
out of the box. The following instructions will help you install your access
point and customize your settings.
II-1.
Initial Setup
1. Connect a PoE switch to the rear Ethernet port using an Ethernet Cable.
(PoE PD, IN, IEEE 802.3af)
2. Use a computer that is connected to the LAN or connect to the WAP's front
Ethernet port using an Ethernet Cable.
power LED is on.
4