AU Optronics BenQ PM060MB2 Manual de instalación - Página 5
Navegue en línea o descargue pdf Manual de instalación para Panel solar AU Optronics BenQ PM060MB2. AU Optronics BenQ PM060MB2 20 páginas. Solar photovoltaic modules
Imprimir página
Please use caution when handling any module.
Please use caution when handling any module.
Please use caution when handling any module.
Please use caution when handling any module.
Remove all metallic jewelry prior to installing this product to reduce the chance of
accidental exposure to live circuits.
Use properly insulated tools to reduce your risk of electric shock.
Do not touch the terminals while the module is exposed to light.
During installation use suitable protection prevent a discharge of at least 30 direct
current volts to each person on crew.
Do not connect or disconnect modules when current from the modules or an external
source is present.
Do not remove or misuse module connectors, this could void module warranty.
Cover all modules in the PV array with an opaque material before making or breaking
any connections.
Use only the supplied locking connectors and safety clips in order to prevent untrained
persons from disconnecting the modules once installed.
There are no serviceable parts within the module. Do not attempt to change or repair
any part of the module.
Damaged modules (broken glass, torn back sheet, broken j-boxes, broken connectors,
etc) can present electrical hazards as well as laceration hazards. Contact with damaged
module surfaces or module frame can cause electric shock. The dealer or installers
should remove the module from array and contact the supplier for disposal instructions.
STORAGE
STORAGE
STORAGE
STORAGE
When storing modules for any period of time, cover modules to ensure protection from
the elements.
When storing the modules, turn so that the glass is face down. Do not allow water to
collect inside module, this can damage module connectors.
When storing the modules, do not allow the anodized profiles (frames) to come into
contact with contaminants such as cement or mortar, which will cause damage to the
anodic oxide coatings.
*A
*Always contact your module supplier for additional instructions if maintenance is necessary.
*A
*A
lways contact your module supplier for additional instructions if maintenance is necessary.
lways contact your module supplier for additional instructions if maintenance is necessary.* * * *
lways contact your module supplier for additional instructions if maintenance is necessary.
2013/7/25
4