Auber Instruments SYL-1512A Manual de instrucciones - Página 2
Navegue en línea o descargue pdf Manual de instrucciones para Controlador de temperatura Auber Instruments SYL-1512A. Auber Instruments SYL-1512A 7 páginas.
Imprimir página
◆ Display range：-1999～9999
◆ Display resolution：1 ℃ , 1℉, or 0.1 ℃ , 0.1℉ with Pt100 RTD sensor input.
◆ SSR driving output: 10VDC, 40 mA
◆ LED display：0.28" red color
◆ Out of range display："EEEE"
◆ Working condition：0～50℃，≤85%RH
◆ Relay contact rating：220VAC @ 3A
◆ Outside dimensions：48×24×75mm
◆ Mounting cutout dimension：45×22mm
3. Front Panel and Operation
① AL- Relay J1 indicator
② Select next parameter/value increment.
③ Select previous parameter/value decrement
④ Digit shift/Auto tuning
⑤ Set/Confirm
⑥ OUT- Output indicator
（AT）- blinking during auto-tuning process
⑦ Parameter Display
4. Parameter Setting
a) Configuration Parameters
Code
Note 1．0：Relay J1 as alarm output; SSR output disabled。Can be used as On/Off control。
1：Relay J1 as PID controlled relay contact output. SSR output disabled.
2：Relay J1 as alarm output; SSR PID controlled with 12 V output.
Note 2．The autotune offset will shift the SV value down by the the Atdu value during the auto tune
Table 1, Configuration Parameter Setting
Description
Inty
Input Type
outy
Controlled output
device
Atdu
Autotune offset
PSb
Input offset
rd
Control function
CorF Display Unit
End
Exit
Figure 2
Setting
Initial
Range
Setting
See table 2
K
0，1，2
2
0～200(deg) 10
-100～
0
100(deg)
0：heating
0
1：Cooling
0：℃ 1：℉ 1
2
Note
1
2