Auber Instruments SYL-2372 Manual de instrucciones - Página 7
Navegue en línea o descargue pdf Manual de instrucciones para Controlador de temperatura Auber Instruments SYL-2372. Auber Instruments SYL-2372 8 páginas.
Imprimir página
AUBER INSTRUMENTS
relay wear out, it is more economical to replace them than to repair the
controller. In this example, we assume the coil voltage of the contactor is the
same as the voltage of the controller power supply. The voltage of power
supply for alarm is 120VAC. Note: You don't have to wire or set the alarm
to control the temperature. It is just to show how the alarm can be wired.
5.3 Controlling a 24V valve
1 13 14 6
2
7
3
8
SYL-2372
+
4
9
-
5
10
TC
Figure 8. SYL-2372 with thermocouple input. This is a typical wiring set up for a
24V gas, hot water valve, or a contactor with 24V coil voltage.
2021.06
Solenoid valve
S
L
Fuse
N
120VAC
24VAC
Copyright © 2021 Auber Instruments Inc. All rights reserved.
No part of this datasheet shall be copied, reproduced, or transmitted in any
way without the prior, written consent of Auber Instruments. Auber Instruments
retains the exclusive rights to all information included in this document.
WWW.AUBERINS.COM
Auber Instruments Inc.
5755 North Point Parkway, Suite 99,
Alpharetta, GA 30022
www.auberins.com
Email: [email protected]
P7/8