3onedata TNS5800D Series Manual de instalación rápida - Página 4
Navegue en línea o descargue pdf Manual de instalación rápida para Interruptor 3onedata TNS5800D Series. 3onedata TNS5800D Series 4 páginas. Layer 3 wall mounting industrial ethernet switch
También para 3onedata TNS5800D Series: Manual de instalación rápida (4 páginas), Manual de instalación rápida (4 páginas)
Imprimir página
LED
Indicate Description
(E1-E16,
devices normally
G1-G20)
OFF
POE port is not powering other PD
devices
【Logging in to WEB Interface】
This device supports WEB management and configuration.
Computer can access the device via Ethernet interface. The
way of logging in to device's configuration interface via IE
browser is shown as below:
Step 1
Configure the IP addresses of computer and the
device to the same network segment, and the
network between them can be mutually accessed
Step 2
Enter device's IP address in the address bar of the
computer browser.
Step 3
Enter device's username and password in the login
window as shown below.
Step 4
Click "Login" button to login to the WEB interface of
the device.
Note:
The default IP address of the device is "192.168.1.254".
The default username and password of the device are
"admin123".
If the username or password is lost, user can restore it to
factory settings via management software; all modified
configurations will be cleared after restoring to factory
settings, so please backup configuration file in advance.
Please refer to user manual for specific configuration
method of logging in to WEB interface and other
configurations about network management function.
【Specification】
Panel
Gigabit PoE M12
10/100/1000Base-T(X), M12
(Female), 8-Pin X-Coded,
automatic flow rate control,
full/half duplex mode, MDI/MDI-X
autotunning; The maximum
capacity of a single port is 30W
PoE power supply output. Pin 1
and 2 of PoE power supply are
positive, while pin 3 and 4 are
negative
Gigabit M12
10/100/1000Base-T(X),
M12(Female), 8-Pin X-Coded,
Automatic Flow Control, Full/half
Duplex Mode, MDI/MDI-X
Autotunning; support two groups
of Bypass
100M PoE M12
10/100base-T(X), M12 (Female),
4-Pin D-Coded, automatic flow
control, full/half duplex mode,
MDI/MDI-X automatic detection;
The single port supports up to
30W PoE power supply output.
Pin 1 and 3 of PoE power supply
are positive, while pin 2 and 4 are
negative
Console port
CLI command line management
port (RS-232), M12(Female),
4-Pin D-Coded
Alarm interface
M12(Female),
Indicator
Switch Property
Backplane bandwidth
Packet buffer size
MAC Address Table
Power Supply
Power input
Connection Mode
Power Consumption
Full-load(without PoE)
Full-load(with PoE)
Working Environment
Working temperature
Storage temperature
Working humidity
Protection grade
4-Pin
D-Coded,
support 1 relay alarm output, with
current
load
capacity
of
1A@30VDC or 0.3A@125VAC
Power indicator, alarm indicator,
running
indicator,
interface
indicator, PoE indicator
128G
12Mbit
16K
110VDC (66~156VDC)
Support
reverse
connection
protection
M12 (Male), 4-Pin A-Coded
＜20W
＜120W
-40~75℃
-40~85℃
5%～95% (no condensation)
IP67(metal shell)