dams Elev82 Touch EVTB-1600 Manual de instrucciones de montaje - Página 10
Navegue en línea o descargue pdf Manual de instrucciones de montaje para Mobiliario interior dams Elev82 Touch EVTB-1600. dams Elev82 Touch EVTB-1600 13 páginas. Back-to-back desks
Imprimir página
16
Step 16
Now position the desktop onto
the framework ensuring that the
scalloped edge of the desktop is
at the centre of the frame.
Align the holes in the desktop
end rails with the pre-drilled
holes on the underside of the
desktop.
Use the wood screws supplied
to attach the top to the frame, if
you are using a cordless/power
driver make sure it is on a low
torque setting.
NOTE
Use Ø5 x 20mm wood screws to
attach the top to the frame.
17
Step 17
Finally attach the desktop
controller to the underside of
the desktop using the wood
screws provided. If you are using
a cordless/power driver make
sure it is on a low torque setting.
There are pre-drilled holes on
either side of the top so the
controller can be attached to the
Left or Right of the desk.
NOTE
Use Ø4 x 25mm wood screws to
attach the controller to the top.
NOTE
If the holes don't line up,
loosen the grub screws
and adjust the width of the
frame before re-tightening
the grub screws.