AIRTUG NFE-6 Instrucciones de montaje y uso - Página 2

Navegue en línea o descargue pdf Instrucciones de montaje y uso para Scooter AIRTUG NFE-6. AIRTUG NFE-6 8 páginas.

Tire Pressure:

The tire pressure can range from 15 psi for lighter aircraft, up to 28 psi for heavier

aircraft.

Transaxle:

This is a sealed unit and should not require maintenance or ﬂuid.

Drive Wheel Bearings:

Caster Zerk Fittings:

Drive Chains:

Apply chain lube periodically depending on use and environment.

Tools Needed For Assembly:

and / or wrenches.

Assembly Note: All reference to "right" and "left" orientation is made while standing behind the tug

and looking forward. The "rear" or "back" of the tug is the end the operator stands.

1. Keep batteries fully charged.

2. Battery connections should be kept tight at all times. Periodic inspection is recommended.

3. Keep batteries clean from all dirt and corrosion.

4. Batteries should not be discharged to the point of no longer being able to power the tug. Keeping the

batteries fully charged will greatly reduce the risk of a dead battery when you need it most.

5. Batteries should be brought up to a full charge at the earliest opportunity using the built in 24V battery

charger with reverse polarity protection and ﬂoat mode. The battery charger should be left on when the tug

is parked to maintain proper charging and maintenance of batteries at all times. Keeping the batteries fully

charged will reduce the risk of freezing in cold temperatures.

6. Avoid charging the batteries when the ambient temperature exceeds 120

Periodic battery testing is an important preventative maintenance procedure. Hydrometer readings of each

cell while fully charged gives an indication of balance and the true charge level. Imbalance could mean the

need for equalizing, and is also a sign of potentially improper charging or a bad cell. Voltage tests (open

circuit, charged or discharged) can identify a bad or weak battery. Load testing will identify a bad battery

when other methods fail. A weak battery will cause premature failure of a companion battery.

8. Extreme temperatures can substantially affect battery performance and charging. Cold temperatures

reduce battery capacity and retard charging. Heat increases water usage resulting in overcharging.

www.airtug.com

Permanently lubricated.

Needs to be lubed periodically to ensure ease of caster wheel steering.

Wire cutter, utility knife, 5/16" - 1/2" - 9/16" & 11/16" sockets