ADDER AdderLink X-DVIPRO Manual - Página 10

Navegue en línea o descargue pdf Manual para Extensor ADDER AdderLink X-DVIPRO. ADDER AdderLink X-DVIPRO 15 páginas. Adder pro dvi
También para ADDER AdderLink X-DVIPRO: Especificación (2 páginas), Manual del usuario (16 páginas)

Imprimir página

4 Connect the link cable (see page 2 for cable advice) to the remote module

socket labelled

TO LOCAL

CATx link cable

[MS2 variant only] Attach a

second category 5e, 6 or 7a

link cable (up to 60 metres in

length) to the upper socket on

the MS2 remote module.

Secondary CATx link cable

Primary CATx link cable

Power connection

1 Connect the output lead of the supplied power adapter to the socket

labelled '

' on the remote module.

POWER

X-DVIPRO: Output lead

from the power adapter

X-DVIPRO-MS2: Output lead

from the power adapter

2 Insert the IEC connector of the separate power lead into the corresponding

socket of the power adapter. Connect the other end of the power lead to a

nearby mains socket.

3 After all connections are made, power up the monitor and remote module

(then the local module, if using the X-DVIPRO-MS2 variant) and finally

switch on the computer.