CONCEPT 2000 IR-Link CP 70A Manual de instalación

Navegue en línea o descargue pdf Manual de instalación para Unidad de control CONCEPT 2000 IR-Link CP 70A. CONCEPT 2000 IR-Link CP 70A 2 páginas.

Imprimir página
IR-Link type CP 70A
IR-Link type CP 70A
EAN-No. 5703513006303
Product description
Remote control module IR-Link type CP 70A is
especially developed for remote control of
CONCEPT 2000 light control system with 38KHz
infrared remote controls type CP 76 (8 channels)
and type CP 79 (32 channels).
IR-link type CP 70 can transmit 8 channels on
the data bus and with possibilities of connection
of up to 8 IR-preamplifiers.
The module transmits at impact via infrared
preamplifier a command over the data bus.
Commands are received by the respective relay
and dimmer modules, which then react on the
command as required. The addressing and
programming are done by means of IR-remote
control and programming keys CONKEY type CP
79.
The channel range to be used (1-8, 9-16, 17-24
etc. see table of functions on the back) is
programmed into the module. Only one channel
range at a time can be active pr. module.
Up to 4 pcs. CP 70 can be connected on the bus
i.e. 32 channels can be established for IR remote
control. Power supply is via the 3-pin plug
provided, which is connected to the modules. Via
this plug plus (24 V DC), minus and data are
connected.
Installation guide.
Mount the module on the DIN rail and connect
the plug between the modules. Via this plug +/-
and "data cord" are connected.
Connect low current to the module, and check
connection before voltage is supplied for the
module. CP 70A must have external power
supply from type CP 11 (18-28 V DC).
10.08.97
Functional principle of IR-Link typ CP 70A
IR-Link CP 70A
CP 70A
receives signals
8 channels
from IR-
preamplifier,
DATA
decodes them and
transmits them on
the data bus to
active modules type
Infrared-preamplifier
receives 38KHz signals
from remote controls and
transmits them on cord for
the decoder IR-Link type
CP 70A.
Infrared remote control
transmits 38KHz signals
(8/32 channels) to
infrared preamplifier(s).
Control options with IR-Link
Light requirements
DINING
WALL
CEI-
TABLE
LING
Light scene 1
EAL
M
Light scene 2
GUESTS
Light scene 3
TELEVISION
Light scene 4
CLEANING
Toggle switches
ON/OFF
Help relays
(Curtain control)
Light dimmers
Leading edge
Dimmer module
type CP 31LR
TRIAC-dimmer
Trailing edge
ON/OFF +
Dimmer module
REGULATION
type CP 31CR
Transistor dimmer
Ballast controller
Dimmer module
0-10V
type CP 31BC
Low current control
Connection diagram IR-Link type CP 70A
CP 70A
+ _
Plus 24V
DATA
Minus (-)
D
Data
3
IR-preamplifier
type CP 72H
FUGA 50x77mm
Terminals
COFFEE
TABLE
Terminal
Terminal B
Terminal
C
Terminal
D
Terminal
E
Terminal
F
Terminal
G
Terminal
H
Terminal
I
Terminal
K
Terminal
L
Relay module
type CP 24
Technical data IR-Link type CP 70A:
Low current
Voltage
Current at 18 V DC max.
Relay module
Power consumption at 18 V DC max.
type CP 24
Power consumption pr. preamplifier
Impulse time min.
Terminals for max.
Cable length
Mechanical data for CP 70A
Temperature range
Installation
Isolation
Insulation
DIN rail symmetric
Dimensions (H x W x D)
Weight CP 70A
Moduleno.
Forforstærkerindgange
24V
_
+
1
2
3
4
5
6 7
8
+ _
B C D E F G H I K L
D
+
-
F
+
F
2
S1
S2
3
1
5
S3
S4
4
S5
LD
LD
LD
LD
LD
1
2
3
4
5
Touch button panel
with built-in
IR-preamplifier
- type CP 2502
- type CP 2507
(low current)
Symbol Input
+
Plus 24V DC
-
Minus (-)
D
Preamplifier input 1
E
P
reamplifier
input 2
F
P
reamplifier
input 3
G
P
reamplifier
input 4
H
P
reamplifier
input 5
I
P
reamplifier
input 6
K
P
reamplifier
input 7
L
P
reamplifier
input 8
24V DC (18-28V)
30 mA
0,5 VA
0,6 VA
50 ms
2,5mm Ø
max. 100 m
-5º......+35ºC
for building-in
4KV > 8 mm
DIN 40050
DIN 46277
85x70x72
100 g
5.29
Plus 24V
Minus(-)
Data