Elite Acoustics D6-8 Manual rápido - Página 2
Navegue en línea o descargue pdf Manual rápido para Altavoces Elite Acoustics D6-8. Elite Acoustics D6-8 5 páginas. Elite acoustics engineering live-performance studio monitor with 6 channels, digital mixer & effects, and bluetooth
Imprimir páginaD6 is the most comprehensive portable sound system currently
produced; D6 offers extreme versatility without compromise. Our
designers have incorporated a full featured programmable Digital
Mixer with Effects and Custom Display into our legendary A4
sonic platform. This combination of incredible clarity and studio
quality sound reproduction with all the features of professional
production is unprecedented. A highly intuitive UI with extensive
dedicated parameter control empowers any discerning artist to
unleash studio-quality performances in any venue. Additionally,
D6 stores and manages your parameter settings allowing
instant access to that perfect mix. Simply put, D6 is unrivaled in
performance and versatility.
QUICK START MIC AND ACOUSTIC GUITAR
In this example we connect an acoustic guitar to Chan 1, and a
Mic to Chan 2.
1. Set Battery Switch to "Connect"
2. With "Speaker Volume" turned down, Turn "Power Switch" to
"On" position.
3. Connect the Line Level Output of your acoustic guitar into
Chan 1, Line 1/4" input jack. Note: Chan 1 Source is set to
"Mic/Line."
4. Connect your Mic to Chan 2, XLR input jack. Note: Chan 2
Source is set to "Mic/Line."
5. Set input levels. Press "System"; the LCD shows a level bar
graph for each channel. Adjust rear panel "Gain" control until
the display shows -12dB for Guitar and Mic.
5A. Adjust Master Volume for desired output level.
6. Set Mic Mix, EQ, and Reverb.
6A. Press "Main" adjust chan 2 encoder to +9, i.e., approxi-
mately 75% of max level.
6B. Press Chan 2 Encoder: LCD shows EQ parameters for
Chan 2. Adjust 5 encoders as necessary to set your EQ.
For our example we'll set "LowC" to 180 Hz, "Low" to +4.0,
"Mid" to +5, "MidF" to 2.0k and "Hi" to +2.0.
6C. Press "Reverb" Chan 2 encoder +2.0.
7. Repeat step 6 for Chan 1 (acoustic guitar) Mix, EQ, and Re-
verb.
8. Start with master EQ, Low, Mid, and High set flat (detent
position) and adjust as needed.
LCD FUNCTIONS
Ch1
Main
Ch2
Aux
System
Menu Buttons with LCD:
Press any of the 6 menu buttons(black button located to the
left and right of LCD) or 5 encoders(blue knobs located around
LCD) to access and adjust features and settings. Most menus
have several pages of options, which are adjusted by turning the
corresponding encoder.
Main
Mix
Ch1
Ch56
Ch2
Ch3
Ch4
"Main" Page 1: "Main Mix"
Adjust the level of each of the
5 channels.
Aux
"Aux" : "Aux Mix" Adjust the level of each of the 5
channels sent to the Aux Outputs.
"Aux" : "Aux Pan" Adjust the panning between
"Aux Send 1" and "Aux Send 2" for each of the 5
channels.
"Aux" : "Aux Param" Assign "Pre" or "Post" fader
i.e., "Main Mix" Channel 1 through Channel 6, signals
to the Aux Sends. You can also select either "Main"
mix or "Aux" mix as the source for the XLR outputs.
Main
Pan
Ch56
Ch3
Ch4
Main
Pan
Ch1
Ch56
Main
Ch2
Ch3
Ch4
"Main" Page 2: "Main Pan"
Adjust the stereo panning for each of
the 5 channels.
Aux
Mix
Ch1
Ch2
Ch3
Aux
Pan
Ch1
Ch2
Ch3
Chorus
Delay
Reverb
Ch56
Ch4
Ch56
Ch4