3onedata IES615-1F-2DI Manual de instalación rápida - Página 3
Navegue en línea o descargue pdf Manual de instalación rápida para Enrutador de red 3onedata IES615-1F-2DI. 3onedata IES615-1F-2DI 3 páginas. Managed industrial ethernet switch
Imprimir página
Ethernet port connection has not
OFF
established valid network connection.
No data or abnormal data is being
OFF
TX
transmitted through serial port
(1-2)
Blinking
Serial port is transmitting data
No data or abnormal data is being
RX
OFF
received through serial port
(1-2)
Blinking
Serial port is receiving data
【Logging in to WEB Interface】
This device supports WEB management and configuration.
Computer can access the device via Ethernet interface. The
way of logging in to device's configuration interface via IE
browser is shown as below:
Step 1
Configure the IP addresses of computer and the
device to the same network segment, and the
network between them can be mutually accessed.
Step 2
Enter device's IP address in the address bar of the
computer browser.
Step 3
Enter device's username and password in the login
window as shown below.
Click "OK" button to login to the WEB interface of
Step 4
the device.
Note:
The default IP address of the device is "192.168.1.254".
The default username and password of the device is
"admin".
If the username or password is lost, user can restore it to
factory settings via device DIP switch or management
software; all modified configurations will be cleared
after restoring to factory settings, so please backup
configuration file in advance.
Please refer to user manual for specific configuration
method of logging in to WEB interface and other
configurations about network management function.
【Specification】
Panel
100M copper port
10/100Base-T(X)
self-adapting
full/half duplex self-adaption
or specified operating mode,
support
self-adaption
100M fiber port
100Base-FX, support
SC/ST/FC interface
RS-232 serial port
DB9 male connector,
electrostatic protection 15kV
RS-485/422 serial port
5-pin 5.08mm pitch terminal
block, isolation voltage 2kV,
electrostatic protection 15kV
2-core 7.62mm pitch terminal
Alarm interface
block, support 1 relay alarm
information
loading capability 1A/24VDC,
0.5A/120VAC
Power indicator, running
indicator, interface indicator,
Indicator
alarm indicator and serial port
transmission indicator
Switch property
Backplane bandwidth
Packet buffer size
MAC table size
Power supply
Input power supply
Access terminal
Consumption
IES615-2D (RS-232)
RJ45
port,
IES615-1F-2D (RS-232)
IES615-2F-2D (RS-232)
MDI/MDI-X
IES615-2DI (RS-485)
IES615-1F-2DI (RS-485)
IES615-2F-2DI (RS-485)
Environmental Limits
Working temperature
Storage temperature
Working humidity
output,
current
Protection grade
1.2G
0.5Mbit
2K
DC power supply products
12~48VDC
Support dual power supply
redundancy, nonpolarity, and
anti-reverse connection
Support built-in overcurrent
3.0A protection
4 pins 7.62mm pitch terminal
blocks
No-load: 0.84W@24VDC
Full-load: 1.54W@24VDC
No-load: 1.80W@24VDC
Full-load: 2.40W@24VDC
No-load: 2.50W@24VDC
Full-load: 3.00W@24VDC
No-load: 1.22W@24VDC
Full-load: 1.90W@24VDC
No-load: 2.10W@24VDC
Full-load: 2.60W@24VDC
No-load: 3.00W@24VDC
Full-load: 3.50W@24VDC
-40～75℃
-40～85℃
5%～95% (no condensation)
IP30 (aluminum shell)