Elite Core PMA Manual del usuario - Página 2

Navegue en línea o descargue pdf Manual del usuario para Amplificador Elite Core PMA. Elite Core PMA 2 páginas. Personal monitor amplifier

The green LED will be lit when the battery is at full power. When both red and green LED's are

lit it indicates that the battery is close to running down. When just the red LED is lit it indicates

that it is time to change the battery.

Adjusts the balance between the L and R channels.

Adjusts the ratio between L and R channels when independent

signals (not stereo) are sent to the two input channels.

By means of the Pan control the ratio between both channels can

be adjusted.

Switches the unit on and off.

These combination XLR/TRS balanced jacks connect to the input signal source.

Please use the included AC/DC adapter or equivalent. Plugging in the adapter disengages the

battery.

9V, 100mAH, -PIN +RING

To operate in MONO mode connect your input source to either R or L input, adjust the Pan to

center position, and switch the MODE switch to MIX-MONO.