Anybus X-gateway Manual de la red - Página 8
Navegue en línea o descargue pdf Manual de la red para Equipos de grabación Anybus X-gateway. Anybus X-gateway 16 páginas. Profibus master interface
También para Anybus X-gateway: Manual del usuario (20 páginas), Hoja de instalación (2 páginas), Manual de la red (14 páginas)
Installation
3
Installation
3.1
Connectors and Switches
Fig. 2
PROFIBUS master adapter interface
PROFIBUS Connector X1.1 (female 9-pin D-sub)
If the node is the last on a bus segment, use a PROFIBUS connector with built-in terminating
resistors.
Pin
1
2
3
4
5
6
7
8
9
Housing
PROFIBUS Configuration Connector X1.2 (male 9-pin D-sub)
The PROFIBUS configuration connector is used to connect a computer to the master interface for
configuration. A null modem cable with female 9-pin D-sub connectors is required.
Pin
1
2
3
4
5
6
7
8
9
Housing
Anybus
®
X-gateway
™
PROFIBUS Master Interface Network Guide
This product contains parts that can be damaged by electrostatic discharge (ESD). Use
ESD prevention measures to avoid damage.
Signal
Description
-
(reserved)
-
(reserved)
Line B
Positive RS-485 RxD/TxD
RTS
Request To Send
GND BUS
Isolated signal ground (RS-485)
+5V BUS
+5 V (RS-485)
-
(reserved)
Line A
Negative RS-485 RxD/TxD
-
(reserved)
Shield
Connected to PE
Signal
Description
-
(reserved)
RS-232 Rx
RS-232 receive data
RS-232 Tx
RS-232 transmit data
-
(reserved)
GND
Signal Ground
DSR
(reserved)
-
(reserved)
-
(reserved)
-
(reserved)
Shield
Connected to PE
6 (14)
SCM-1202-104 1.0 en-US