Anycom CF-300 Manual de inicio rápido - Página 4

Navegue en línea o descargue pdf Manual de inicio rápido para Hardware informático Anycom CF-300. Anycom CF-300 20 páginas. Bluetooth pc/cf card
También para Anycom CF-300: Nota técnica (2 páginas), Nota técnica (5 páginas), Hoja de especificaciones (2 páginas)

Imprimir página

Installation

Before Insatllation

Important: Please plug in the PC/CF card into the computer only after software installation.

Please delete all older versions of the ANYCOM Bluetooth application software from your system. Uninstalling is

carried out as follows:

1. Go via START via Settings to System control

2. In the area of System control select Software

3. Look for the entry ANYCOM Bluetooth software x.x.x.x. Select this and click Delete.

Installion of the ANYCOM Bluetooth PC Card under Windows

1. Place the ANYCOM Bluetooth CD also supplied in your CD-ROM drive. If the Auto-run function for the

CD-ROM drive has been switched on (normally this is the case under Windows), then the installation

program starts automatically. If this is not the case, please open your Windows Explorer and open the

CD-ROM drive. There you find the file Setup.exe, which you now start manually.

2. The window Installer is opened and you see the products which are ready for installing. Please click the

product which is to be installed by you. In the next window select the Operating system. At this point you

can also call in the English-language manual.

3. Click Install. The window "Setup ANYCOM Bluetooth Card" is opened and the installation starts. Please

click Next. When the "Licence agreement window" opens, select the point I accept the agreement.

Click Next to continue.

Installation

4. Next you will be shown in which folder the software is to be installed. Here you can select the folder you

wish. When this has been completed, please click the Next field. In the next window it is indicated how the

ANYCOM Bluetooth Card is to be filed as a short-cut (short name). You can alter this name. In order to pro

ceed please click Next. In the next window you will be shown the configuration for the Bluetooth card. A

name is given which you can also alter. Please click the Next field in order to continue. The next window

shows the settings selected by you. After checking these settings please click the field Install. The software

installation now starts automatically. After installation you will be shown what virtual connections have

been specified. Please acknowledge with Okay.

5. Please confirm completion of installation by clicking Finish. Please close the PC/CF card installer. On the

desktop you can now see the Bluetooth assistant which you should please close with Quit. You can see two

new Bluetooth icons, one on your desktop and another in the Windows task bar.

6. Driver installation

Now plug the ANYCOM Bluetooth PC card into one of the existing PC card slots. Please wait for a moment.

If your operating system signals "New hardware found" and the window "Assistant for search for

new hardware" opens, please click Next and follow the assistant up the completion of the driver installation.

Installation of the ANYCOM Bluetooth CF Card on a Pocket PC

1. Connect the pocket PC to the PC by means of the cable supplied by your supplier or via the infrared

connection. Ensure that the pocket PC is connected to your PC and that this connection is active. There

you will find the file Setup.exe, which you can now start manually.

2. Select pocket PC as the operating system and the various additional programs which you would like

to install.

3. Follow the installer as the software specifies.