AnyCubic Wash and Cure Manual del usuario - Página 5

Navegue en línea o descargue pdf Manual del usuario para Impresoras 3D AnyCubic Wash and Cure. AnyCubic Wash and Cure 10 páginas.

This machine (Wash & Cure) is suitable for washing and post-curing of printed objects of M-SLA 3D printers

(such as the Anycubic Photon Series 3D printers). This machine has two working modes, wash and cure. The

following describes the basic functions and operation precautions in diﬀerent working modes. Please read

the manual carefully before get started.

①Plug in the power

Wash mode

1.Switch the machine to wash mode by touching the Mode on the front panel.

2.Place the washing bucket ﬁrmly on the platform by the indentation.

(Note: The curing table must be took oﬀ if it is on the platform.)

Instructions

②Turn on the machine

③The default mode is curing