ADDER AdderLink X100 Manual del usuario - Página 8
Navegue en línea o descargue pdf Manual del usuario para Receptor ADDER AdderLink X100. ADDER AdderLink X100 19 páginas. Extender set
También para ADDER AdderLink X100: Manual del usuario (19 páginas)
Imprimir página
Operation
General use
In use, the local device and X100 receiver should be transparent - the system
and its peripherals should operate exactly as normal, the only difference being
that they are now 100 metres or more apart.
In some installations, you may see some 'shadows' to the right of high contrast
screen characters. This can be caused by an incorrectly selected sharpness setting
and it may be necessary to make adjustments to correct this. Please see
compensation.-.sharpness.and.brightness
section.
Video.
in the 'Special configuration'
Locking and unlocking the system
In situations where the computer system (and the local device) can be locked
away, the X100 receiver offers a viable security system to deter unauthorised
use. Once a password has been set, a simple key sequence allows the system to
be quickly and securely detached from its peripherals. Only the correct password
will reconnect the X100 receiver with the local device.
To lock the system
1 First set a password. For further details, please refer to the
setting
section in the 'Special configuration' chapter.
2 Simultaneously press the currently configured hotkeys (by default,
) along with
.
The screen will go blank and the three keyboard
indicators will begin alternately flashing between the
'Num Lock' and 'Scroll Lock', and 'Caps Lock'. This
sequence indicates that a password is required.
To unlock the system
1 Enter the correct password and press
Note: Passwords are NOT case sensitive.
Note: If an invalid password has been entered and the keyboard indicators
are not flashing as described above, press
2 If the correct password is entered, the screen will be restored and normal
operation can continue.
To enable the video
Simultaneously press the currently configured hotkeys (by default,
long with
. This command will be required to restore the video if
along with
is used when no password has been set.
To disable the video
Simultaneously, press the currently configured hotkeys (by default,
along with
.
Password.
and
.
to clear the incorrect attempt.
and
)
and
and
)