Duco DucoBox Focus Manual de instalación - Página 13

Navegue en línea o descargue pdf Manual de instalación para Campana de ventilación Duco DucoBox Focus. Duco DucoBox Focus 16 páginas.
También para Duco DucoBox Focus: Manual del usuario (2 páginas), Manual de instalación (20 páginas), Inicio rápido (4 páginas)

Imprimir página
Duco DucoBox Focus Manual de instalación
Before activating air calibration mode:
• Close all windows and doors�
• Ensure that all duct openings in the DucoBox are fully closed and that the
DucoBox cover is closed!
2
• Avoid air leaks in the ventilation ducts�
• Set all window ventilators to the open position� Any Tronic ventilators will open
automatically�
Pull the plug out of the socket and wait a few seconds�
3
Put the plug back into the socket� The DucoBox will be configured automatically on
4
start-up� Calibration takes 30 seconds + 1 minute per connected control valve�
07.B Checking
The steps set out below can be used to check whether flow rates have been set correctly�
Checking configured flow rate
Open the DucoBox cover�
1
Press 'HIGH' briefly� The DucoBox will remain in configuration mode for 30
2
minutes (as standard)�
Close the cover�
3
Wait at least one minute to allow the ventilation system to stabilise�
4
Measure the vents� If a flow rate differs from the desired output, this can be
5
adjusted via the display menu or using the Duco Network Tool�
If you finish before the standard setting of 30 minutes, re-open the DucoBox cover
6
and press 'HIGH' again� Then replace the cover on the DucoBox�
Iteration
Rev. Date
Name
Description
POWERCABLE
Handelsstraat 19 - 8630 VEURNE
tel. 0032-58/330033 - fax.0032-58/330044
email: info @ duco.eu
www.duco.eu
This drawing is property of Vero Duco NV and can not be copied, neither shown to
third party/externally without written permission.
L2000631 Installation guide for DucoBox Focus (Revision L | 06.09.2022)
ENGLISH
open
Status
Status Date
23-Nov-17
Status
Date: 23-Nov-17
Scale: 1.000
Tol.: -
Draftsman: -
Mat.:
Production Number:
STEKKER_STOPCONTACT
Format: A3
Outline
Weight
Coat. Surf.
Volume
Drawing Number
0.000
0.000
STEKKER_STOPCONTACT
mm
kg/m
dm²/m
mm³
Iteration
Rev. Date
Name
Description
POWERCABLE
Date: 23-Nov-17
Scale: 1.000
Tol.: -
Draftsman: -
Mat.:
Production Number:
Format: A3
STEKKER_STOPCON
Outline
Weight
Coat. Surf.
Volume
Handelsstraat 19 - 8630 VEURNE
tel. 0032-58/330033 - fax.0032-58/330044
0.000
0.000
STEKKER_STOPCO
email: info @ duco.eu
www.duco.eu
This drawing is property of Vero Duco NV and can not be copied, neither shown to
mm
kg/m
dm²/m
mm³
third party/externally without written permission.
13
Status Date
23-Nov-17
Drawing Number