Duct Pure 80k Manual del usuario - Página 5

Navegue en línea o descargue pdf Manual del usuario para Limpiador de aire Duct Pure 80k. Duct Pure 80k 12 páginas.

RECOMMENDED INSTALLATION TOOLS

A - 3 .5" Hole Saw Bit

B - 3/8" Drill Bit

C - Drill/Power Driver

INSTALLATION REQUIREMENT

1 .

Unit should be installed downstream of

the air handler in the HVAC system .

2 .

The ductwork around the installation

area should be cleaned and dry to

insure proper adhesion of the gasket

materials and any tape used .

3 .

Two circular openings, measuring

approximately 3 .5" (8 .89cm) each, will

need to be cut into the existing duct

work to install the unit properly .

ELECTRICAL REQUIREMENT

To use the 120V plug, be sure to locate the unit within 6 ft . of a standard 120V grounded outlet .

Long term use on an extension cord is not recommended due to safety considerations .

HARDWIRING REQUIREMENT

Permanent wiring of the unit into your HVAC system, or installations using a 220V plug

(not included) should be done by a licensed HVAC Installer or Electrical Contractor only .

For 110V or 220V Applications:

For International Applications:

D - Utility Knife

E - Tin Snips

F - Phillips Head Screwdriver

Black = L1, White = Neutral, Green - Ground

Brown = L1, Blue = L2, Green/Yellow = Ground