AnyTone AT6200 GW Manual de instalación - Página 12

Navegue en línea o descargue pdf Manual de instalación para Repetidor AnyTone AT6200 GW. AnyTone AT6200 GW 19 páginas. Mobile signal repeater

6. Plug the power supply into the Signal Booster input (carefully, to avoid damaging the center pin) and then into a wall

outlet.

Note: It is recommended to plug all AC power supplies for home electronics into a Surge Protector Power Strip.

7. If the light indicator doesn't turn on, please see the lights indication instructions.

8. Using multiple Signal Boosters in one installation could cause interference to the base station (except for the In-Line

Signal Boosters).

7.2.2. Repeater's ports description

1. Outdoor port: connected with the outdoor antenna by cable

2. Indoor port: connected with indoor antenna directly or by cable

3. DC IN: connected with power supply.

7.2.3. Accessories selection

Choosing accessories pay attention to the two characteristics – frequency and impedance. All accessories shall support the

repeater's frequencies. For example, if the repeater's frequency is GSM900, all the accessories must support the GSM900

frequency.

7.3. Repeater Settings

7.3.1. Indicator Light Instructions