Anywave ATSC 60W Manual de inicio rápido - Página 14

Navegue en línea o descargue pdf Manual de inicio rápido para Transmisor Anywave ATSC 60W. Anywave ATSC 60W 17 páginas.

13. Navigate to the CAL setting under the AD3 Advanced submenu and select CAL

then press OK to calibrate the FWD PWR meter on the Exciter front panel to

100%.

14. To turn the TX On/Off, please use the RF On/OFF control in the RF submenu

of the exciter LCD or the exciter web interface. You may also use the TX

ON/OFF button on the PA's Home page, as shown below.

15. For Remote TX Monitoring and Control, you may network to the PA LAN RJ-

45 rear panel connection at 192.168.1.210 – you can change the PA ipaddress

by navigating to the Config submenu on the PA's touchscreen, then press

Network button, and change the value of IP, or you can change it via the PA's

Web Interface (please reference your PA User Manual for details). You may also

network to the Exciter REMOTE RJ-45 rear panel connection at 192.168.1.143

– you can change the exciter ipaddress by navigating to the CONFIG submenu

(simultaneously press Left and Right buttons) and change the value of IP (please

reference your Exciter User Manual for details).

ACT-PAU01-QSG-DOC-V1.1, 06/26/2018

ATSC 60W Quick Start Guide

Page 14 of 17