Dudley Resan Standard Shelf Instrucciones de montaje - Página 3
Navegue en línea o descargue pdf Instrucciones de montaje para Mobiliario interior Dudley Resan Standard Shelf. Dudley Resan Standard Shelf 3 páginas. Through wall mounted installation
Imprimir páginaInstallation using Through Wall fixings.
Shelfr Preparation
1. Hand tighten the 3 off M10 threaded fixing studs into the threaded inserts on the back of the
mirror. If the supplied rods are not long enough to pass through the wall it will be necessary
to cut lengths of standard M10 all-thread down to the correct size.
Fixing the shelf
Note: Fitting the shelf may require two people: one to lift and hold the basin into position
while the other secures it.
1. Lift the shelf and slide into position taking care not to damage either the shelf surface or the
fixing studs.
2. From the other side of the wall secure the shelf into position using M10 washers and locknuts.
Ensure that there is enough thread to fully engage the locknut.
Maintenance
1. It is not recommended that proprietary products be used for cleaning as the vast range of
different chemical composition makes it impractical to test individually with the shelf.
2. Do not use scouring pads, abrasive cleaners, or sharp instruments.
3. In hard water areas lime scale removers can be used to remove lime scale deposits if
necessary.
4. Clean regularly using warm soapy water.
5. Matt Finish Shelves: Deeper cuts can be removed with 1200 grade wet and dry paper.
6. Gloss Finish Shelves: Light scratches and abrasions can be removed by rubbing with a soft
cloth and liquid cutting compound.
Contact Details
Thomas Dudley Ltd
PO Box 28
Birmingham New Road
Dudley
West Midlands
DY1 4SN
United Kingdom
t:
+44 (0) 121 557 5411
f:
+44 (0) 121 557 5345
el:
12271 Iss1 R327139
3 of 3