DUDOFF CH-F4B Instrucciones de uso - Página 6

Navegue en línea o descargue pdf Instrucciones de uso para Placa DUDOFF CH-F4B. DUDOFF CH-F4B 8 páginas. Vitroceramic hob

Imprimir página

CLEANING AND MAINTENANCE

• Remove any residues of food and drops of

grease from the cooking surface by using

the special scraper supplied on request

(Fig.10).

• Clean the heated area as thoroughly as

possible using suitable products, and a

cloth/paper, then rinse with water and dry

with a clean cloth.

• Using the special scraper immediately

remove any fragments of aluminium and

plastic material that have unintentionally

melted on the heated cooking area, or

residues of sugar or food with a high sugar

content. In this way, any damage to the

cooktop surface can be prevented.

• Under no circumstances should abrasive

sponges, or corrosive chemical detergents,

such as oven sprays or stain removers, be

used.

• Do not use water spray and steam to clean

the appliance.

USE (see Fig.9)

This appliance is particularly suitable for the

preparation of foods that are normally grilled or

cooked on the hot-plate (meat or vegetables)

allowing cooking without the addition of fats.

It is recommended the usage of flat-bottomed

recipients with a diameter that is large enough

to cover the hotplate fully in order to use all

the available heat (Fig.8).

TOUCH CONTROL (see Fig.8)

TIMER

A. ON/OFF key > switch the appliance on

and off

B. Lock key > activate control panel lock /

child lock

C. Timer / Plus key > increase timer value

COOKING AREA

STANDARD

WITH SECOND ZONE

COOKING AREA

D. Timer / Minus key > decrease timer value

E. Second Zone key> activate the second

circuit of the extendable cooking zone

F. Cooking Zone / Plus key > increase

power level of the cooking zone

G. Cooking Zone / Minus key > reduce

power level of the cooking zone

L. Cooking Zone Display > display power

level

M. Timer Display > display timer countdown

SWITCHING ON THE HOB

On commissioning, the appliance will be in

the safety position, i.e. control lock is active

and the lock key is illuminated.

In order to use the appliance the safety

function must be deactivated by pressing the

lock key until the indicator light switches off.

Press the ON/OFF key to switch the top on.

All the

zones switch on in the

The control unit remains active for 10 seconds.

If within this time no cooking zone is selected,

the electronic device returns automatically to

the OFF position and the above described

operation must be repeated to switch the

cooking top on again.

SWITCHING ON THE COOKING ZONES

Select the desired cooking zone and press

minus key to set the plate to position 9 (max.

power) or plus key to set the plate to position

1 (min. power). Once this operation has been

completed you can adjust the temperature

with the plus key or minus key.

The power of the single cooking zone can be

adjusted in 9 different positions and will be

shown on luminous display

from "1 to 9".

EXTENDABLE COOKING ZONE

This model features one cooking zone with a

second circuit (extention).

Press the second zone key to activate the

double circuit area. Use the plus key or

minus key to adjust the power level.

displays relative to the cooking

standby position.

with a number