DUDOFF GD-Z01 Manual de instrucciones de instalación y uso - Página 14
Navegue en línea o descargue pdf Manual de instrucciones de instalación y uso para Placa DUDOFF GD-Z01. DUDOFF GD-Z01 17 páginas. Built-in gas hob domino
Imprimir página
Always disconnect the appliance from the
electricity and gas mains before proceeding with
any servicing operation.
11) REPLACING COOKTOP PARTS
Replacement of the components housed inside the
appliance: remove the trivets, knobs and flanges
unscrewing the screws "V" (fig.16) and remove the
glass (see fig. 15).
After having carried out the above listed operations,
the burners, taps (fig. 17) and electrical components
can all be replaced (fig. 18).
It is advisable to change seal "D" (fig.17) whenever
a tap is replaced to ensure a perfect tightness.
WARNING: MAINTENANCE MUST ONLY BE
PERFORMED BY AUTHORISED PERSONS.
FIG. 15
SERVICING
FIG. 16
FIG. 18
Greasing the taps (see fig. 19)
If a tap becomes stiff to operate, it must be
immediately greased in compliance with the following
instructions:
- remove the tap.
- Clean the cone and its housing using a cloth
soaked in diluent.
- Lightly spread the cone with the relative grease.
- Fit the cone back in place, operate it several times
and then remove it again. Eliminate any excess
grease and check that the gas ducts have not
become clogged.
- Fit all parts back in place, complying with the
demounting order in reverse.
- Check the tightness by using soapy water. The use
of the flame is prohibited.
To facilitate the servicing technician's task, here is a
chart with the types and sections of the powering
cables and the ratings of the electrical components.
14
FIG. 17
FIG. 19