Anywhere Cart AC-SYNC Manual del usuario - Página 5
Navegue en línea o descargue pdf Manual del usuario para Carrito de exterior Anywhere Cart AC-SYNC. Anywhere Cart AC-SYNC 6 páginas. 36 bay secure sync & charge cart
También para Anywhere Cart AC-SYNC: Manual del usuario (9 páginas)
To CHARGE devices:
1) With the main power switch OFF,
open the rear panel door on your
AC-SYNC cart.
2) Locate the MODE Switch on the
SYNC Station and move to
"CHARGE" mode.
3) Locate the main power switch on
side of AC-SYNC cart and move to
the "I" position.
HELPFUL HINTS
The use of OEM cables is HIGHLY RECOMMENDED.
While in CHARGE mode:
• Devices can be added or removed any time.
• There should be no LED indicators illuminated.
While in SYNC mode:
• For best results, make sure your HOST device has the latest
version of your preferred SYNC software.
• All devices need to be turned on in order to SYNC.
• USB ports which don't have devices attached, won't illuminate.
• Always check connections before use.
TROUBLESHOOTING:
• Unit does not turn on?
• No HOST status LED in SYNC mode?
• RED or FLASHING LEDs in SYNC mode? Turn OFF Main power switch, then Re-seat or replace DEVICE cable and repeat from step 1.
• Devices won't show up in iTunes?
Specifications subject to change without notice | © 2015 Anywhere Cart | 42400 Winchester Rd Temecula, CA 92590 | 888-650-4488 | www.AnywhereCart.com
To SYNC devices:
1) With the main power switch OFF,
2) Locate the MODE Switch on the
3) Locate the HOST SYNC port on the
4) Locate the main power switch on
5) Verify the HOST status indicator is
Check all power cords going into the power strip / SYNC Station and verify they are plugged in.
Turn OFF Main power switch, then Re-seat or replace HOST cable and repeat from step 1.
a) Close iTunes and reopen it. b) Make sure both the HOST and DEVICES have the latest version of iTunes.
c) Restart the HOST device. d) Repeat from step 1.
NEVER add or remove devices while in
SYNC mode.
open the rear panel door on your
AC-SYNC cart.
SYNC Station and move to
"SYNC" mode.
outside of AC-SYNC cart, plug in
your host device & turn
the device on.
side of AC-SYNC cart and move to
the "I" position.
illuminated
GREEN
and individual
DEVICE status indicators are
SYNC Station Operation
GREEN.