3onedata GW1101 series Manual del usuario - Página 4
Navegue en línea o descargue pdf Manual del usuario para Pasarela 3onedata GW1101 series. 3onedata GW1101 series 4 páginas. Modbus
También para 3onedata GW1101 series: Manual de instalación rápida (3 páginas)
Imprimir página
Cables, power lines and grounding lines cannot be
overlapped and mixed when they are in the same groove
road. When cable is too long, it cannot hold down other
cable, but structure in the middle of alignment rack;
8. Pigtail cannot be tied and swerved as less as possible.
Swerving radius cannot be too small (small swerving causes
terrible loss of link). Its banding should be moderate, not too
tight, and should be separated from other cables;
9. It should have corresponding simple signal at both sides
of the cable for maintaining.
【Specification】
Ethernet port
Standard: 10Base-T, 100Base-TX
Protocol: Support Modbus TCP, Modbus RTU, Modbus ASCII, IP,
APR, ICMP, DNS and DHCP
Signal: Rx+, Rx-, Tx+, Tx-
Speed: 10/100Mbps
Working: Full-duplex and half duplex
Transfer distance: 100m
Connector: RJ45
Serial port
Serial port number: 1 ports RS-232 or 1 ports RS-485/422
RS-232 signal: RXD, TXD, GND, RTS, CTS
RS-485 signal: D+(A), GND, D-(B)
RS-422 signal: T+, T-, GND, R+, R-
Parity bit: None, Even, Odd, Space, Mark
Data bit; 7bit, 8bit
Stop bit: 1bit, 2bit
Baud rate: 300bps～115200bps
RS-232 Transfer distance: no more than 15m
RS-232 connector: RJ45
RS-485/422 transfer distance: 1200m
RS-485/422 connector: 5 bits terminal block
Protection: class 3 static
Work mode: RTU Slave, RTU Master, ASCII Slave,
and ASCII Master
Multiple master and multi slave connection:
Master mode: maximum 32 TCP slave
Slave mode: 16 TCP master (each master allows 32 commands)
LED Indicator
Power (PWR)
Ethernet port connect statue (Link)
Serial port data indicator: TX1, RX1
Power requirements
Input voltage: 9~48VDC
Type of input: 2 bits terminal block
Consumption
GW1101-1D(RS-232)-P(9~48VDC)
No-load consumption: 0.54W@9V
Full-load consumption: 0.78W@9V
GW1101-1D(RS-485)-P(9~48VDC)
No-load consumption: 0.90W@9V
Full-load consumption: 1.61W@9V
Mechanical
Shell: IP30 protection, metal shell
Installation: Wall mounting
Weight: 230g
Size (L×W×H): 100mm×69mm×22mm
Environment limits
Working temperature: -40~75℃
Storage temperature: -40~85℃
Relative humidity: 5%~95%（non-condensing）
Standard
EMI: EN 55022 Class A, FCC Part 15 Subpart B Class A
EMS: EN 61000-4-2 (ESD), Level 3
Shock: IEC 60068-2-27
Free fall: IEC 60068-2-32
Vibration: IEC 60068-2-6
Warranty
Warranty time: 3 years
Certificates
CE, FCC, RoHS, UL508 (pending)