Duerkopp Adler 550-12-12 Manual de instrucciones - Página 3
Navegue en línea o descargue pdf Manual de instrucciones para Máquina de coser Duerkopp Adler 550-12-12. Duerkopp Adler 550-12-12 15 páginas.
También para Duerkopp Adler 550-12-12: Manual de instrucciones de instalación (6 páginas)
Imprimir página
1. Product Description
1.1 Short Description and Proper Use
1.2 Optional Equipment
The DÜRKOPP ADLER 550-12-12 is a configured sewing station for
the programmed advance crimping of shoulders and sewing on of the
sleeve joining.
With the appropriate optional equipment it can also be used for
selvedges on armholes, neckholes, etc.
The sewing station is equipped with a single needle-double chain
stitch sewing machine with differential bottom transport and foot
upper transport.
The upper transport and forward feed dog of the differential bottom
transport work synchronized. They can be set and switched
different to the rear feed dog.
Electro-pneumatic thread trimmer for upper and lower thread.
Pressure foot stroke and stitch condensation at seam beginning
and seam end.
A microprocessor control assumes the automatic multi-width
regulation with programable follow-up switching.
The memory capacity of the controls allows the pre-programming
of 20 sewing programs including the complete graduated size sets.
Each sewing program can contain up to 13 steps per seam run.
Each step can have its own designated crimp value.
Mirroring left-right sewing piece via the push of a button.
Very simple programming via an operating terminal with graphic
monitor. The operating surface of the monitor can be called up in
10 languages by pushing a button.
With a memory card program transfer to other sewing stations, as
well as program retention, can occur.
Proper Use !
The DÜRKOPP ADLER 550-12-12 may only be used for the advance
crimping of shoulders, the sewing on of sleeve joinings and, with the
appropriate optional equipment, for selvedge work with materials of
textile fibers and leather.
If the DÜRKOPP ADLER 550-12-12 is to be used for bordering of
armholes, neckholes, etc., then is must be equipped with the optional
equipment listed in chapter 2.5.2.
5