Abtus ABT4640 Manual de instrucciones - Página 4

Navegue en línea o descargue pdf Manual de instrucciones para Instrumentos de medida Abtus ABT4640. Abtus ABT4640 11 páginas. Laser height and stagger

3

Getting Started

4.0
4.1
Overview
The ABT 4640 is a light-weight gauge that allows the user to safely take Height
and Stagger measurements of the OHL (Over Head Line) using laser technology.
Super-Elevation (SE) and Rail Edge to Face of Structure (REFOS) can also be
measured
The laser unit is positioned at eye-level and features a 90º viewing prism, enabling
the operator to easily set the laser location marker onto the OHL in all weather
conditions including bright sunshine. The Height reading is displayed on an
illuminated LCD screen on the laser. Stagger position is indicated on a reflective
scale for ease of use at night as well as day.
SE is displayed on an illuminated LCD screen and REFOS is measured by
transferring the laser unit to a separate bracket
The vertical beam folds down flat to the horizontal beam for storage and transport.
4.2
Assembly
1.
To release the vertical beam, pull the lever towards you (See Figure 1).
Lift the vertical beam until it rests against the stop. Release the toggle
latches and fasten securely to the vertical beam (shown in Figure 2).
Figure 1
1
Additional laser units can be purchased to remove the requirement to swap laser positions when
measuring REFOS
1
.
4640-1 IMP Issue 03
Figure 2